DND was sent as presence unavailable with the literal status text
"dnd": it replaced your status, and other clients showed "dnd". Where
the server supports MSC3026 (busy_presence), DND now sends presence
org.matrix.msc3026.busy and leaves the status alone (Synapse keeps
busy across /sync set_presence=online). Busy renders as red "Do Not
Disturb" with the real status line; the legacy unavailable + "dnd"
encoding is still recognised and still used on servers without it.
Status saves / clears no longer downgrade busy. The SDK rejects
non-spec presences, so busy goes through a direct authed PUT.
Fixes#283
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
After a homeserver stall Element Call showed "Connection lost" while the
call bar still looked joined. Handle the fork's io.lotus.call_error:
show "Call disconnected" with a Reconnect button (io.lotus.reconnect),
and reconnect automatically once sync is back.
Fixes#318
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The fork reports what actually runs as io.lotus.denoise_state, but the
host never listened ("unsupported action"), so a failed ML denoiser
silently published the raw mic. Handle it: toast when ML did not start
or fell back to another model. Remove LotusDenoiseFeature, which waited
for a postMessage nothing sends any more and accepted it from any frame.
Refs #260
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
When a message was already in the target language, or its language
could not be detected, Translate switched itself back off with no chip,
no "Translating…" and no error. Show a short toast instead: "This
message is already in English." or "Couldn't tell what language this
message is in, so it wasn't translated."
Fixes#287
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Custom emoji and sticker images, pack avatars and power-level badge
images were uploaded with their EXIF intact (GPS location, timestamp),
although they are published to every member of the room or space. Route
those three pickers through a new useStrippedFilePicker, which applies
the same stripImageMetadata as attachments and avatars.
Fixes#332
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
When a room admin turned off Allow Screen Sharing, the sharer got two
toasts: the correct "turned off by a room admin" and the fork's
"ended" notice, "the shared window was closed", which was wrong. Skip
the ended notice while the room policy forbids sharing.
Fixes#297
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
After a reload during a DM call the toast said "You were in the call in
Bob Builder"; it now says "You were in a call with Bob Builder". DM
calls are never auto-rejoined (it could ring the other person), and if
they have left by the time you tap, the toast says "Call ended" instead
of starting a new, ringing call.
Fixes#302
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
A hung Synapse (accepts connections, never answers) kept sync SYNCING
for up to 110 s (pollTimeout 30 s + the SDK's 80 s buffer), so no strip
showed and Kuma was never asked. A watchdog now notices a /sync overdue
by 45 s, confirms with a 5 s GET /_matrix/client/versions, then shows
"Lotus Chat's server isn't responding…" and polls Kuma at once.
Fixes#317
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
useNotificationsQuiet evaluated the quiet-hours window (and the
"Pause notifications" expiry) only at render time, and the long-lived
message/invite notifiers rarely re-render, so someone leaving Lotus open
overnight with quiet hours 22:00–07:00 got every sound all night (and a
30-minute pause could outlast itself). The hook now re-evaluates every
30 s.
Verified headless (notifications granted, window unfocused): quiet
hours set to start ~75 s after the app opened; a DM before the window
notified; one inside the window, with the app left alone: before it
still notified, now it's silent.
Fixes#325
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The personal room name (io.lotus.room_names) was only used by the
sidebar, header, intro and call bar; the quick switcher couldn't find a
room by it ("No match found") and showed the server name, as did the
forward/share pickers, toasts, OS notifications and reminders.
useRoomMeta gains useLocalRoomNames() / getLocalRoomName(); the quick
switcher matches both names and shows the personal one, the forward and
share pickers show and filter by it, and message/reminder notifications
use it for the room title.
Verified headless with general renamed to "Zebra Lounge": Ctrl+K "Zebra"
and "general" both list "Zebra Lounge"; the forward picker filtered by
"zebra" lists "Zebra Lounge".
Not covered here (follow-up): message-search result headers, the inbox
notifications page and the threads list still use the server name.
Refs #336
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
usePresenceUpdater sent a one-off PUT /presence, but the SDK kept
long-polling /sync with the default set_presence=online and Synapse treats
every sync as "online", so Invisible / Hide Online Status / Idle / DND
flipped back within seconds — a privacy setting that silently didn't work.
The presence helpers now also call mx.setSyncPresence(): offline for
Invisible / Hide Online Status, unavailable for Idle / DND (and auto-mode
idle / hidden tab), online otherwise. The PUT stays for the immediate
change.
Verified on the local Synapse, another account polling every 5 s for 60 s
after a reload in each mode: invisible → offline ×12, hidePresence →
offline ×12, idle → unavailable ×12, dnd → unavailable ×12, online →
online (currently_active) ×12; /sync carries set_presence=offline /
unavailable / online accordingly (before: online* throughout).
Fixes#282
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
useVoiceChannelFull compared the number of MatrixRTC memberships (one per
device) with io.lotus.voice_limit, so one person on desktop + phone, or a
crashed tab whose membership hadn't expired, filled two slots and locked
others out, while the server-side guard (which counts distinct users)
would have admitted them. utils/voiceChannelFull.ts (unit-tested) counts
distinct senders; the header/sidebar counter shows people too.
Verified on the local stack: limit 2, @aud_main in the call on two
devices; @aud_bob's prescreen now shows 1/2 with Join enabled (was
"Channel Full (2/2)"), matching the guard's 200.
Fixes#342
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The pagehide keepalive write sent { presence: 'offline' } with no
status_msg, which Synapse treats as clearing it, so closing or reloading
any Lotus tab wiped the user's status for everyone (intermittently, as
the 10 s presence rate limit sometimes 429'd the write). It now sends the
current status along with the offline state.
Verified against the local Synapse: with a status set from another
device, two reloads and a tab close keep it (server shows
offline/"Gone fishing" after the close; before, the first reload wiped it).
Fixes#339
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Reported on CachyOS: "Check for Updates → The update downloaded but
couldn't be installed … Permission denied (os error 13) at path
/usr/bin/tauri_current_app…". The app was installed from the Arch package;
Tauri's Linux updater can only replace an AppImage.
With cinny-desktop's new update_install_kind command:
- pacman / deb installs: the toast says the update is available and opens
Settings → General → App Updates, which shows the package-manager command
(`sudo pacman -U …pkg.tar.zst`, or the .deb + `sudo apt install`) with
Copy command and Download package — no Install & Restart that can't work.
"Copied" only when the clipboard write actually succeeded.
- other distros: a link to the downloads page.
- Windows, AppImage, and desktop builds without the command: unchanged
in-app update.
- a native "package-managed" refusal shows the same help.
Tests: unit (kinds, commands, refusal detection); in the real client with a
simulated desktop bridge: pacman → toast + Settings command/buttons,
install never attempted; older desktop → in-app flow as before. Unit 1321,
Playwright 26 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
When the homeserver, voice calls or sign-in break, or maintenance is under
way, say so in the app — driven by the Kuma status page
(isitup.lotusguild.org/status/matrix), managed from Kuma's UI. The client
asks Kuma directly (not via our servers) so it still hears "the server is
down" when our servers can't tell it.
- config.json `statusPages`, keyed by homeserver: users of other servers
never contact Kuma.
- utils/kumaStatus.ts (pure, unit-tested): parse Kuma 2.x's public JSON;
a group is down when any monitor fails two checks in a row (down+down or
pending+down); maintenance = windows under way; announcements = incidents.
One strip at a time: server down (connection lost AND Kuma confirms) >
server having problems > maintenance > calls down > announcement;
sign-in problems on the login screen only.
- Wording about the user's own connection: "Connection lost … our status
checks say the server is up, so it may be your internet connection" ONLY
when Kuma checked the server after this client's connection dropped and
it passed; a stale "up" (Kuma needs a minute or two to notice an outage)
keeps the plain "Connection Lost!".
- useServerStatus: polls only while visible; 5 min, 60 s while something is
wrong or the connection is lost, at once when it drops; backoff; any
failure = no banner (Kuma being unreachable never looks like Matrix
being down); GET only, no cookies.
- UI in the existing banner slot and style (ContainerColor/Line like the
sync and clock banners); Details expands; dismiss for calls-down and
announcements (an edited announcement comes back); calls-down note above
Join; phone: one line + Details.
Needs the CSP connect-src to allow https://isitup.lotusguild.org (matrix
repo) before it can fetch in production; until then it fails quiet.
Tests: 15 unit tests (live page layout, two-check rule, any-monitor rule,
unknown/garbage, UTC beat times, stale-vs-fresh "up", priorities, login vs
client, maintenance, announcements + dismiss/edit); e2e (fixtures for Kuma):
calls-down strip + dismiss across reload, other homeservers make no
requests, Kuma 500 → nothing, lost connection + Kuma down → critical strip
instead of "Connection Lost", + fresh "up" → "may be your connection",
+ stale "up" → plain "Connection Lost". Unit 1315, Playwright 26 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
The desktop app loads the bundled Element Call page from its own origin
(http://localhost:<port>), so the call frame can read the app's storage
(login token) and DOM — the hole #43 closed on the web by moving the page
to call.chat.lotusguild.org.
The desktop's local server can also answer on http://127.0.0.1:<port>: the
same server and bundle, but a different origin (and still a secure
context). resolveDesktopCallPageUrl loads the bundled page from there when
the desktop config sets `desktopCallOrigin`:
- only a loopback http origin on the SAME port as the app, no path, query
or credentials;
- only when the app itself runs on http://localhost (release builds; debug
builds on tauri:// keep the same-origin page);
- unset (every desktop build until cinny-desktop opts in, together with the
server bind, CSP and permission changes it needs): unchanged.
The web app is unchanged (elementCallUrl as before).
Tested in a simulated desktop app (Tauri bridge stub + the desktop
config.json, served on localhost and 127.0.0.1) against a local Synapse +
LiveKit, two users: call page from http://127.0.0.1:<port>, parentUrl =
the app origin; the frame gets SecurityError on parent.localStorage and
parent.document (same-origin control: readable); join, speaking indicator,
mic off/on, screenshare start/stop, layout switch and hang-up all work, no
page errors — 12/12 in 5 of 6 runs, like the same-origin control (3 of 4;
the misses on both sides were the local LiveKit connection).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Lotus permalinks (#130) were built from window.location.origin. In the
desktop app that's the local tauri-plugin-localhost server (hash-routed), so
"Copy Lotus Link" copied e.g. http://localhost:…/#/home/!room…, which works
for nobody else. And the link recogniser only knew that local base, so a real
https://chat.lotusguild.org/home/… link in a message opened the browser
instead of the room.
- useLotusShareBase: in the desktop app, links for other people use config
`webAppUrl` (https only, set by cinny-desktop #23) in web path-routing
form; otherwise the origin, as before. Used by "Copy Lotus Link" on
messages, the space menu and space tabs.
- The recogniser accepts several bases: the origin, plus `webAppUrl` in the
desktop app.
- The web app is unchanged.
Verified with a simulated desktop (Tauri bridge + webAppUrl) against a local
Synapse. Copied links are https://chat.lotusguild.org/home/<room>/<event> and
https://chat.lotusguild.org/<space>. A public link in a message renders as
the room pill and clicking it opens the room in-app, with nothing sent to the
system browser. The web app still copies origin links. Unit tests for the
base selection; Playwright 20 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
The Linux desktop app runs on WebKitGTK, which ships without WebRTC (2.52
has no RTCPeerConnection; 2.54 disables it outright pending a libwebrtc
backend around 2.56), so calls can't work there. Until now the call button
just disappeared, the call room said "Your browser does not support WebRTC"
with Join disabled, and an incoming call couldn't be answered.
In the desktop app (isTauri) without WebRTC:
- call rooms: "Calls aren't available in the desktop app on Linux yet: its
web engine has no WebRTC" + an "Open in browser" button;
- incoming-call overlay: the same, with "Answer in browser";
- room header: the call button stays, and opens the room in the browser.
The link is the room in the web app (config.json `webAppUrl`, https only,
new key); the user presses Join there. Deliberately not an auto-join link:
a crafted URL must not be able to join a call and open someone's mic. It
opens through the desktop's new-window handler (web/mail schemes only → the
system browser). Without `webAppUrl` the explanation shows with no button;
browsers without WebRTC keep the old message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Groundwork for serving the call page from its own origin
(call.chat.lotusguild.org). Inert until config.json sets `elementCallUrl`:
without it the bundled same-origin page is used exactly as today.
- callPageUrl: resolves `elementCallUrl` — absolute https only (http only on
localhost for development); anything else, and the desktop app, fall back
to the bundled page so a bad value can't break calls. Set once from the
loaded client config.
- CallEmbed builds the widget URL from it; the widget origin (used by the
message guard and Capability Delegation) follows automatically.
- Soundboard: a host blob: URL can't be fetched from another origin, so
io.lotus.inject_audio now also carries the clip's bytes (`audio`). Forks
that predate it ignore the field and use `url`, so this is safe on the
released fork.
Needs element-call's lotus-call-origin branch (host-origin message check +
inject_audio bytes) released and pinned before `elementCallUrl` is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Firefox, Safari and the WebKitGTK desktop app can't hand the user's click to
the call frame (no Capability Delegation), and getDisplayMedia needs it. The
host used to click EC's hidden footer button through the DOM instead, which
dies with same-origin. Now (pins element-call-embedded 0.25.0-lotus.20):
- those engines get `lotusFrameScreenshare`, the fork shows EC's own
screenshare button in the frame, and the call bar and status bar hide
theirs once controls_state reports `frameScreenshare`; the
screenshare-audio mute stays;
- the room's call policy is pushed with io.lotus.set_frame_screenshare, so
the frame button hides where the server would refuse a share, like ours;
- Chromium keeps the delegated io.lotus.set_screenshare from the host bar.
Removed the fallbacks for forks older than lotus.14, which read or clicked
EC's DOM: the screenshare/layout/settings/reactions/leave button lookups
and their MutationObservers, the frame-window hotkey binding, and the
speaking/muted tile scrape in useCallSpeakers (io.lotus.call_state is the
only source now). getCallDocument is gone; the host's only handle on the
frame is postMessage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
The SDK routes thread replies out of every room timeline set, the gallery's
detached one included, into the room's Thread objects, so photos posted in
a thread never reached the gallery. The gallery now merges media from the
loaded threads (deduped, newest first) and refreshes on ThreadEvent.NewReply,
waiting for decryption in encrypted rooms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Pins @lotusguild/element-call-embedded 0.25.0-lotus.19.
- Styles: the fork now hides its own footer (`lotusHostControls=1`) and
sets its root color-scheme from the theme, so the host no longer
injects `#lotus-ec-styles` or sets inline styles on EC's DOM. The two
other injected rules matched nothing in EC 0.25 (dead). The
transparent background was already the fork's (`lotusTransparent`).
- Hotkeys: PTT / deafen keys pressed with focus inside the call frame now
arrive as `io.lotus.hotkey` (the host sends the codes via
`io.lotus.set_hotkeys`), instead of listeners on the frame's window.
The window binding stays only for a fork that doesn't report `hotkeys`.
- Fixes (with lotus.19): pressing the deafen key M with focus in the call
also hit EC's own "M = toggle mic" shortcut, so the first press turned
the mic ON instead of deafening — even in push-to-talk mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
With the mention list open, pressing Enter sent the half-typed text
("hey @bo") instead of inserting the highlighted person — found while
investigating the "composer hit a snag" report; only Tab picked. Enter now
picks the top suggestion for people, rooms and commands, as in Discord,
Slack and Element.
useAutocompleteEnter listens in the window capture phase (so it runs before
the composer's submit handler) and only while the list has suggestions —
with no command match Enter still sends. Emoji suggestions are deliberately
left on Tab only, so "lol :p" + Enter still sends rather than inserting an
emoji. IME composition and Shift/Ctrl+Enter are untouched. Tab now inserts
the member's display name, same as a click.
Verified: "@bo" + Enter inserts the mention and sends nothing; the next
Enter sends "hey @bob hi" with m.mentions; ":smi" + Enter still sends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Zoom on a phone was only the +/- buttons; the pinch people try first did
nothing. usePinchZoom tracks a two-finger gesture on the viewer's media area
and scales from the zoom it started at (clamped 1×–5×, snapping back to
exactly 1× when released near it, so one-finger swipe navigation re-arms).
The area gets touch-action: none so the browser doesn't zoom the page
instead. One-finger swipe and pan already ignore multi-touch.
Verified on an emulated Pixel 7 with CDP two-point touch: spread 80→200 px
gives 250 %, closing to 120 px gives 150 %, closing fully returns to 100 %,
and a one-finger swipe afterwards still moves 2/2 → 1/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Status messages are saved per device and re-sent with every presence
heartbeat (a presence write without status_msg clears it on Synapse). A
device never receives its own user's presence changes made on other
devices, so the DP3 fix in db864326 — mirroring remote changes from the
Profile page — could never fire: device B kept a status that device A had
cleared and re-published it on its next state change.
Heartbeats now reconcile with the server first: GET our own presence,
send the server's current status_msg and bring the local copy in line.
Falls back to the local copy when the read fails, when the server shows
us offline (invisible mode clears the status by design), and for 15 s
after this device saved/cleared its own status (a server read that
hasn't caught up yet can't override a fresh save).
Verified with two sessions of the same user against local Synapse:
B sets "dp3 old status" → A clears it → B goes hidden→visible → server
stays "" and B's local copy is removed (before: back to "dp3 old status").
A sets "dp3 new from A" → B heartbeat keeps it and adopts it locally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Upload atoms now also report into an app-wide `uploadProgressAtom`, and
`aggregateUploadProgress` turns every in-flight upload into one taskbar
state: byte-weighted percentage while uploading, indeterminate until a
size is known, red after a failure (held 4 s, then cleared), none when
done. Cancelled uploads just disappear. `useTauriTaskbarProgress` sends it
to the native `set_taskbar_progress`, at most ~4 times a second, always
ending on the latest state.
Verified with a throttled 6 MB upload: 0% → 99% at 250 ms steps, then
cleared; with the upload request aborted: 0% → error → cleared after 4 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Sends `set_tray_call_state` from the same effect as the taskbar thumbbar,
so tray and thumbbar can't disagree. Verified through a real local call:
idle → active → active+muted → active+muted+deafened → active+muted → idle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
A friend's update failed ten times in a row ("Update check failed: error
sending request for url (…nsis.zip)") before the 11th went through, and
he didn't know what to do. The label was also wrong: the check had
worked; the download failed.
- Progress: "Downloading update… 28% (14.3 MB of 49.9 MB)", "The update
server didn't respond. Trying again in 3 s (attempt 2 of 4)…", from the
native `lotus-update-progress` events (cinny-desktop retries itself).
- Failures name the step (check / download / install, from the native
error prefix) in plain language, with Try again and a Download
installer button (Windows: the setup .exe; else the release page), and
the raw error under "Details".
- Installing from the update toast now shows a "Downloading update"
toast, and on failure a sticky "Update didn't install" toast that
retries on click and points at Settings → General → App Updates.
Before, the toast vanished and the failure was only visible in Settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Notification sounds called `audio.play()` without handling the promise,
so every message that arrived before the user interacted with the page
(e.g. right after launch) logged an uncaught NotAllowedError — 15 in a
short test run. Same pattern in the video thumbnail loader, the voice
preview (which now also resets its Play button) and useMediaPlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Handles the native `lotus-notification-mark-read` event through the
same `markAsRead` path as the room menu's "Mark as Read", honouring the
private-receipt settings. Verified: 3 unread → 0 on the server.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
- useTauriFocusAssist queries the new `get_focus_assist` command on mount.
The native poll's first reading is emitted during app setup, before the
page listens, and the atom resets on every reload — so with Focus Assist
already on, notifications leaked until the OS state flipped
(cinny-desktop #15).
- The toast quick reply takes the real `threadId` from the notification
data and replies inside the thread (cinny-desktop #17).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Touch had no way to move between images except the small arrow buttons.
A one-finger horizontal swipe now goes next/previous, and is inert while
the image is zoomed in (where the same gesture pans). The classifier is
pure and unit-tested: ≥ 60 px horizontal, not mostly vertical, under
800 ms, single finger.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
io.lotus.screenshare_notice → "Screen sharing stopped — the shared window
was closed.", "Your screen share is showing nothing — the shared window
may be minimised or hidden.", and a sticky "Still sharing?" after 30 min
with nobody else in the call (fork ≥ 0.25.0-lotus.12).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
utils/haptics.ts: tick('ptt-on' | 'ptt-off' | 'reaction') → 10/10/8 ms
navigator.vibrate, a no-op without the API (iOS), when the system prefers
reduced motion, or when the new Settings → Calls "Haptic Feedback" switch
(default on, only rendered where the API exists) is off. PTT is observed
once through pttActiveAtom so the keyboard, global-hotkey and on-screen
paths all tick; reactions tick where the reaction event is sent in the
room and thread timelines (quick bar, hover bar, sheet and emoji board
all funnel there).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
While joined, a device-local record {roomId, deviceId, joinedAt,
lastSeen, mic, video} is written and refreshed every 30 s; a deliberate
hangup (HangupCall/Close) and logout clear it. On the next start, once
the first sync is in and the room's MatrixRTC session has reported its
members (waited for up to 10 s — it fills a moment after sync), a fresh
record (< 10 min) for this device with someone still in the call yields
either a sticky "Rejoin voice?" toast (tap to rejoin) or an automatic
rejoin, per the new Settings → Calls → After a Restart (Ask / Rejoin
automatically / Do nothing; default Ask). Skipped when our own membership
is already live from another device, or only our stale one is left.
Mic/camera state comes from the record (camera still gated by
cameraOnJoin); PTT is applied by startCall as usual.
Pure decision in utils/callRejoin.ts with tests. Verified headless:
reload mid-call → toast → tap → back in the call; hangup → reload → no
toast; auto mode → back in without a prompt.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
A reply to an image, video or sticker used to quote just the filename.
The quote (timeline) and the composer's reply-draft preview now carry a
36 px thumbnail from the event's own thumbnail, decrypted for E2EE media
via the same hook the gallery uses — never the full-size file. Clicking
still jumps to the original.
useDecryptedMediaUrl and getThumbMxc moved out of MediaGallery into
hooks/ and utils/ so components/message can use them without a cycle.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
One line in the existing toast style when a call you were in ends: the
duration from our own join clock, plus the fork's io.lotus.call_summary
readout (fork ≥ 0.25.0-lotus.10) when it arrives — "connection was
good", "3 reconnects", "connection was poor for 4 min". Nothing is
stored or sent; the summary is one postMessage at hangup. Without the
fork summary the toast still shows the duration.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Audit of every rendered time found five families of ad-hoc formatting:
the shared Time component + copies of its today/yesterday branch
(forwarded header, thread summary, read receipts, device tile, moderation
alerts, edit history), locale-default toLocale*String calls that ignored
the user's 12/24 h and date-format settings (scheduled tray, reminders,
schedule preview, notification snooze, bookmarks, threads list, search
cache line, room insights, media gallery), a hard-coded en-US date in the
activity log, and three relative-age variants.
utils/formatTimestamp.ts now holds the rules — today → time; yesterday /
tomorrow → day word + time; last 6 days → weekday + time; older → date +
time in dateFormatString — plus autoDate / time / date / dateTime styles,
formatDayDivider (full weekday), formatShortAge (room list) and
formatRelativeAge (list rows). useTimestampFormatter binds them to the
settings. 11 unit tests with an injected 'now'.
Visible changes are limited to consistency: 12 h times keep the existing
zero-padded hh:mm A; the a11y label and Created-by line use the user's
date format instead of a fixed long month.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Fat-finger guard for phones. On coarse-pointer devices the first tap on a
sticker (emoji board Sticker tab) or a GIF parks it in a small bar with a
thumbnail, name, Send and Cancel; a second tap on the same item or Send
sends it; tapping a different item switches the preview; tapping empty
picker space or Cancel clears it. Mouse clicks, keyboard activation and
screen-reader activation (bare click without touch events) still send in
one step, and the emoji tab is untouched.
useRecentTouch records touches inside the picker at the document level so
it survives the Sticker tab remount, and reports false without a coarse
pointer.
Also fixes the compact composer's GIF picker opening mostly off-screen:
end-aligning the 312px popout to a button near the left edge of the
overflow row pushed it to x≈-95; it now anchors to the row itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
A small red dot on a space tab when any room in that space (recursively)
has an active MatrixRTC session, so a live call is visible even when you
are looking at a different space or your DMs. Hidden while the space is
selected — the room list already shows the Live badge there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
useSensitiveCopy: the recovery key's Copy button becomes 'Copied · clears in
60 s' and counts down; at zero the clipboard is cleared only if it still holds
the key (readText() where permitted — if the browser refuses to read, nothing
is wiped rather than risk eating something else). Any other copy made in the
app cancels the timer. No setting. Verified headless with a fake clock:
countdown ticks, clipboard emptied at 0; copying something else mid-countdown
cancels and leaves that content untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Host half of the talking-while-muted feature. The fork (0.25.0-lotus.9)
reports speakingWhileMuted for the local participant in io.lotus.call_state —
a level tap on the muted track, so cinny captures no audio. useMutedTalkWarning
polls that flag while muted; after 1.5 s of it being true it shows one sticky
toast, "You're muted — click to unmute", whose click unmutes; it fires at most
once per mute session (re-arms after unmute → mute), is retired the moment the
mic comes back on by any means, and never runs in Push-to-Talk mode. Setting
'Warn me when I talk while muted' (default on) sits next to AFK Auto-Mute.
Verified headless with a tone mic: no toast at +1 s, toast at +4 s, click
unmutes and clears it, second mute re-arms, unmute via the button clears it,
PTT mode → nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Lotus CI
jared