DeliveryStatus showed whatever mEvent.status was at the last timeline
re-render, and a local echo's status changes (SENDING → SENT → confirmed,
NOT_SENT → retried) only emit event-level events, so the last message in
a quiet room kept "Sending..." (or a stale "Failed to send. Click to
retry" after an outbox retry) indefinitely. It now re-renders on
MatrixEventEvent.Status / LocalEventIdReplaced.
Not browser-verified in this change (checks: tsc, unit tests, eslint).
Fixes#306
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Joining a voice channel alone sends a call notification (m.rtc.notification)
to the room, and the timeline rendered every unanswered one as "Missed call
from X", so everyone in the channel saw a missed call from someone who had
just joined it. Ringing already excluded these rooms; the missed-call line
didn't.
utils/callRing.ts (unit-tested) holds the one rule for both: only DMs and
invite-only groups outside any space ring or show "Missed call"; voice
rooms, space channels, restricted and public rooms don't.
Verified headless with the same two notifications from Bob: the Voice
Lounge chat showed 2 "Missed call" lines before, 0 after; a small
invite-only group still shows its missed call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
matrix.lotusguild.org turned off open registration (2026-10-16; accounts
come from SSO/LLDAP), so the login page's registration probe
(POST /_matrix/client/v3/register) now answers 403 "Registration has been
disabled" instead of 401 + UIA flows. The boot smoke test treated that
console line as unexpected and failed on every branch (seen on #360).
collectConsole now skips a 403 only when its source URL is the register
endpoint; any other 403 still fails the test.
Verified: boot.spec passes locally in chromium, webkit and iphone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
background-position can't run on the compositor, so every frame of the
animated chat backgrounds repainted the whole chat area: 51 to 72% main-thread
busy while idle in a room at 60 fps. The drifts are slow (3 to 22 px/s,
under a pixel per frame), so each animation now uses steps(): about 12
updates/s for fireflies, stars and aurora and about 24/s for rain and
pulse.
Measured headless (20 s idle in a room, CDP TaskDuration):
none 0.7% → 0.9%; rain 50.7 → 5.9; stars 71.2 → 4.5;
pulse 64.9 → 5.8; aurora 58.9 → 4.2; fireflies 71.7 → 3.8.
Aurora and pulse used ease-in-out; with steps() their motion is now
even-paced. Pause animations / reduced motion still strip the animation.
Fixes#337
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Two easy bypasses of the "this link goes somewhere else" check:
- Any whitespace in the link text disabled it, so "Log in at
chat.lotusguild.org" → evil.example wasn't flagged. hostsFromText now
scans each word for host-shaped tokens; a link is flagged if any named
host is a different site. Bare file names (main.py, report.pdf) and
version numbers are skipped inside sentences so ordinary links aren't
flagged.
- Shared-hosting suffixes counted as one site (alice.github.io vs
evil.github.io, *.pages.dev, netlify.app, vercel.app, …).
registrableDomain now treats a curated list of them as public suffixes
(longest match, incl. s3.amazonaws.com). Curated rather than the full
PSL to stay inside the bundle budget.
Verified with unit tests and headless on real messages: the four bypass
cases are flagged; the honest sentence, file/version text and "click
here" are not.
Fixes#335
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The personal room name (io.lotus.room_names) was only used by the
sidebar, header, intro and call bar; the quick switcher couldn't find a
room by it ("No match found") and showed the server name, as did the
forward/share pickers, toasts, OS notifications and reminders.
useRoomMeta gains useLocalRoomNames() / getLocalRoomName(); the quick
switcher matches both names and shows the personal one, the forward and
share pickers show and filter by it, and message/reminder notifications
use it for the room title.
Verified headless with general renamed to "Zebra Lounge": Ctrl+K "Zebra"
and "general" both list "Zebra Lounge"; the forward picker filtered by
"zebra" lists "Zebra Lounge".
Not covered here (follow-up): message-search result headers, the inbox
notifications page and the threads list still use the server name.
Refs #336
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
- Tab into a link in the hidden part used to scroll the overflow:hidden box
itself (top cut off, and it stayed that way); focus inside now expands
the message, and collapsing resets the scroll.
- "Read more" / "Show less" is announced as a toggle (aria-expanded,
aria-controls); the arrows are aria-hidden.
- The fade is a mask on the content instead of a gradient in a fixed
surface colour, so there's no band in bubble layout, on highlights or
over chat backgrounds.
- The cap is 20rem instead of 320px, so a larger font shows as many lines.
Verified headless on a 41-line message with a link on the last line:
aria-expanded false → focusing the link expands it (aria-expanded true,
no clipping); bubble layout fades into the bubble with no band.
Fixes#343
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Logout left lotus-per-user-volume (Element Call's per-person volume map:
whom the previous user called and turned up/down; same origin on the web)
and settings-sync-meta:<userId> (a key naming the account) in
localStorage. clearPlaintextCaches now removes both; device preferences
(`settings`) are kept as before.
Verified: after joining/leaving a call and logging out via Settings, both
keys are gone (unit test added).
Fixes#347
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Settings sync mirrored enterForNewline to io.lotus.settings, so turning it
on for a phone keyboard switched the desktop to Ctrl+Enter-to-send (and
vice versa). It is now in DEVICE_LOCAL_KEYS.
Verified with one account on a phone and a desktop profile: toggling it
on the phone leaves the desktop at Enter-to-send, and it is no longer in
the synced account data.
Fixes#348
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
Lotus encodes DND as status_msg "dnd". After switching back to Auto, the
heartbeat read the server's status, adopted "dnd" as the user's own and
kept re-sending it, so the custom status was lost and other clients kept
showing "dnd"; the Settings status field showed "dnd" too.
pickHeartbeatStatus (unit-tested) never adopts the "dnd" sentinel and
falls back to the device's real status; Profile neither mirrors it into
the local status nor shows it in the field.
Verified on the local Synapse: "🎮 Gaming" → DND (unavailable/dnd) → Auto
→ online/"🎮 Gaming" (before: online/"dnd").
Still open in #283: while in DND other clients show the literal "dnd";
that needs MSC3026 busy presence on the homeserver (matrix#19).
Refs #283
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
usePresenceUpdater sent a one-off PUT /presence, but the SDK kept
long-polling /sync with the default set_presence=online and Synapse treats
every sync as "online", so Invisible / Hide Online Status / Idle / DND
flipped back within seconds — a privacy setting that silently didn't work.
The presence helpers now also call mx.setSyncPresence(): offline for
Invisible / Hide Online Status, unavailable for Idle / DND (and auto-mode
idle / hidden tab), online otherwise. The PUT stays for the immediate
change.
Verified on the local Synapse, another account polling every 5 s for 60 s
after a reload in each mode: invisible → offline ×12, hidePresence →
offline ×12, idle → unavailable ×12, dnd → unavailable ×12, online →
online (currently_active) ×12; /sync carries set_presence=offline /
unavailable / online accordingly (before: online* throughout).
Fixes#282
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The composer's location button sent the exact position (6 decimals) from a
single click once the browser permission had been granted, discarding the
fix's accuracy, so a ±3.5 km Wi-Fi/IP fix was shown as exact.
- ShareLocationDialog: "Share your location?" with the coordinates and
±accuracy, a "Check on OpenStreetMap" link, and Cancel / Send
approximate (~1 km) / Send. Focus starts on Cancel; Esc cancels.
- utils/geoShare.ts (unit-tested): RFC 5870 geo URI with `;u=` accuracy;
approximate shares round to 2 decimals and never claim better than 1 km.
- Location cards show the ± when the event carries `u=`.
- The toolbar icon is a pin instead of the globe.
Verified headless (fix 40.748817,-73.985428 ±3500 m): the click opens the
dialog and sends nothing; Cancel/Esc send nothing; Send approximate →
geo:40.75,-73.99;u=3500; Send → geo:40.748817,-73.985428;u=3500; the card
reads "40.74882, -73.98543 (±3.5 km)".
Fixes#340
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
ReminderMonitor pushed an ordinary toast (auto-dismissed after 4 s) and
deleted the reminder at once, with no OS notification — one that came due
while the app was in the background or the user was away was lost.
Now the reminder toast is sticky; clicking it opens the message and
dismissing it closes it, and only then is the reminder deleted (an unseen
one returns on the next start). When the window isn't focused it also
raises an OS notification (respecting "show notifications" and quiet
hours; no decrypted E2EE text, per N106).
Verified headless (notifications granted, window unfocused): due at
t+24 s, the toast stayed up for the remaining 51 s, one OS notification
"Reminder :: call the dentist before 5", the reminder stayed in
io.lotus.reminders until dismissed, then was removed.
Fixes#338
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
useVoiceChannelFull compared the number of MatrixRTC memberships (one per
device) with io.lotus.voice_limit, so one person on desktop + phone, or a
crashed tab whose membership hadn't expired, filled two slots and locked
others out, while the server-side guard (which counts distinct users)
would have admitted them. utils/voiceChannelFull.ts (unit-tested) counts
distinct senders; the header/sidebar counter shows people too.
Verified on the local stack: limit 2, @aud_main in the call on two
devices; @aud_bob's prescreen now shows 1/2 with Join enabled (was
"Channel Full (2/2)"), matching the guard's 200.
Fixes#342
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
The pagehide keepalive write sent { presence: 'offline' } with no
status_msg, which Synapse treats as clearing it, so closing or reloading
any Lotus tab wiped the user's status for everyone (intermittently, as
the 10 s presence rate limit sometimes 429'd the write). It now sends the
current status along with the offline state.
Verified against the local Synapse: with a status set from another
device, two reloads and a tab close keep it (server shows
offline/"Gone fishing" after the close; before, the first reload wiped it).
Fixes#339
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017PCb59uY3UKqDqt7B6hzd5
`npm audit --audit-level=high --omit=dev` (Build & Quality Checks) started
failing on every branch after new advisories were published:
- source-map-js 1.2.1 → 1.2.2 (high, GHSA-68fv-2mgg-jv7q; transitive via
sanitize-html → postcss, in range — lockfile only)
- i18next-http-backend 4.0.0 → 4.0.2 (low, GHSA-xvq9-wjp8-hwqf)
- katex 0.16.47 → 0.18.11 (low, GHSA-238p-pmpm-9mq7; fixed in 0.18.2).
0.17/0.18's breaking changes are an internal __defineFunction API and
prefixed internal CSS classes; Lotus uses neither (KaTeX.tsx calls
renderToString and imports the package's own stylesheet).
Only these four lockfile entries change (plus katex's own CLI dependency
commander 8 → 15). npm audit --omit=dev: 0 vulnerabilities.
Verified headless against Vite with a fresh dep cache (katex 0.18.11
served): inline and display math render (\frac, \sqrt, \sum with limits),
KaTeX fonts load, no page errors; translations still load (en strings,
no raw keys). tsc clean, 1319 unit tests pass, eslint 0 errors (36
warnings, unchanged), prettier clean, production build OK.
Fixes#345
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Giphy and Tenor link previews forced every GIF into the same box — full
card width, max 200px tall, object-fit: cover — whatever its shape: a
square GIF lost half its height, a portrait one three quarters (only the
middle band showed, so captions and faces at the top/bottom were cut), and
a 100×80 GIF was blown up 4×.
utils/gifPreviewSize.ts (unit-tested) fits the GIF inside 400×320 from
og:image:width/height, keeping its aspect ratio and enlarging small GIFs
at most 2×. The card centres the GIF on the surface colour with
object-fit: contain, reserves the box before it loads, and the GIF badge
sits on the GIF's corner. Without dimensions it shows at natural size,
capped by the card. The >10 MB thumbnail fallback is requested at 2× the
box (800×640) so it isn't upscaled.
Verified headless (fixture previews, desktop / Pixel 7 / 320px phone):
480×200 → 398×166, 300×300 → 320×320 (292×292 on 320px), 240×480 →
160×320, 100×80 → 200×160, all 100% visible; the no-dimension fallback
and narrow cards keep the ratio. tsc clean, 1325 unit tests pass, eslint
0 errors (36 warnings, unchanged), prettier clean.
Fixes#341
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
One "security" strip, in the same top slot and style as the status banner
(#124), for this device, in priority order:
- "Verify this device" — cross-signing exists but this device isn't
verified (can't unlock backed-up history, untrusted to others). First,
because verifying with the recovery key also connects the backup.
- "Connect this device to your key backup" — a backup exists, this device
isn't using it.
- "Set up key backup" — no backup at all (includes accounts without
cross-signing; the setup flow does both).
The button opens Settings → Devices (existing flows); "Not now" snoozes.
Rules: nothing in a device's first 24 h; "Not now" snoozes that nudge 7
days; 3 dismissals stop it; never on a healthy device; waits until sync
has settled (never under "Connecting…"); outage/maintenance/connection
strips win. Per-device record in localStorage, wiped on logout. Mounted
inside the Matrix client context and an error boundary (an early version
outside the context crashed the app on load — caught before pushing).
Also: the status strip wraps its text on phones instead of truncating it
when there's no Details button (benefits #124's strips too).
Design approved on #123 (real-client screenshots there). Tests: 4 unit
(the #123 state table, loading, timing, stored record); e2e: nothing during
the grace period, "Set up key backup" → Settings → Devices, "Not now"
holds across a reload. Unit 1319, Playwright 29 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
`sudo pacman -U <url>` also fetches `<url>.sig` and failed (404) on
CachyOS: remote packages fall under RemoteFileSigLevel (signature
required) and we don't sign the package. A downloaded file installs under
LocalFileSigLevel (optional): `curl -LO <url> && sudo pacman -U ./…`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
npm audit --omit=dev started failing every PR: brace-expansion <=1.1.20
(via @eslint/eslintrc → minimatch 3) has three high-severity DoS
advisories. Lockfile-only patch bump; nothing else changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Reported on CachyOS: "Check for Updates → The update downloaded but
couldn't be installed … Permission denied (os error 13) at path
/usr/bin/tauri_current_app…". The app was installed from the Arch package;
Tauri's Linux updater can only replace an AppImage.
With cinny-desktop's new update_install_kind command:
- pacman / deb installs: the toast says the update is available and opens
Settings → General → App Updates, which shows the package-manager command
(`sudo pacman -U …pkg.tar.zst`, or the .deb + `sudo apt install`) with
Copy command and Download package — no Install & Restart that can't work.
"Copied" only when the clipboard write actually succeeded.
- other distros: a link to the downloads page.
- Windows, AppImage, and desktop builds without the command: unchanged
in-app update.
- a native "package-managed" refusal shows the same help.
Tests: unit (kinds, commands, refusal detection); in the real client with a
simulated desktop bridge: pacman → toast + Settings command/buttons,
install never attempted; older desktop → in-app flow as before. Unit 1321,
Playwright 26 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
When the homeserver, voice calls or sign-in break, or maintenance is under
way, say so in the app — driven by the Kuma status page
(isitup.lotusguild.org/status/matrix), managed from Kuma's UI. The client
asks Kuma directly (not via our servers) so it still hears "the server is
down" when our servers can't tell it.
- config.json `statusPages`, keyed by homeserver: users of other servers
never contact Kuma.
- utils/kumaStatus.ts (pure, unit-tested): parse Kuma 2.x's public JSON;
a group is down when any monitor fails two checks in a row (down+down or
pending+down); maintenance = windows under way; announcements = incidents.
One strip at a time: server down (connection lost AND Kuma confirms) >
server having problems > maintenance > calls down > announcement;
sign-in problems on the login screen only.
- Wording about the user's own connection: "Connection lost … our status
checks say the server is up, so it may be your internet connection" ONLY
when Kuma checked the server after this client's connection dropped and
it passed; a stale "up" (Kuma needs a minute or two to notice an outage)
keeps the plain "Connection Lost!".
- useServerStatus: polls only while visible; 5 min, 60 s while something is
wrong or the connection is lost, at once when it drops; backoff; any
failure = no banner (Kuma being unreachable never looks like Matrix
being down); GET only, no cookies.
- UI in the existing banner slot and style (ContainerColor/Line like the
sync and clock banners); Details expands; dismiss for calls-down and
announcements (an edited announcement comes back); calls-down note above
Join; phone: one line + Details.
Needs the CSP connect-src to allow https://isitup.lotusguild.org (matrix
repo) before it can fetch in production; until then it fails quiet.
Tests: 15 unit tests (live page layout, two-check rule, any-monitor rule,
unknown/garbage, UTC beat times, stale-vs-fresh "up", priorities, login vs
client, maintenance, announcements + dismiss/edit); e2e (fixtures for Kuma):
calls-down strip + dismiss across reload, other homeservers make no
requests, Kuma 500 → nothing, lost connection + Kuma down → critical strip
instead of "Connection Lost", + fresh "up" → "may be your connection",
+ stale "up" → plain "Connection Lost". Unit 1315, Playwright 26 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Step 1 of moving the desktop app's login out of the webview's plaintext
localStorage: keep a verified copy of the tokens in the OS keychain
(Windows Credential Manager, via cinny-desktop's new secure_session_*
commands). The session is still read from localStorage exactly as before,
so nothing about login changes and a keychain problem can't log anyone out.
Step 2 (a later release, once this has run on real installs) switches reads
to the keychain and drops the tokens from localStorage.
- sessions.ts: onSessionPersisted — listeners told about every session
write (login, token rotation) and removal (logout); a throwing listener
can't break the write.
- keychainMirror.ts: desktop only. Mirrors userId/deviceId/accessToken/
refreshToken (not the rest of the session); reads first and writes only
when the copy differs, then verifies by reading back; serialized, 5 s
timeouts; no session → clear (also covers a logout whose reload beat the
clear). Every failure is a status, never an exception. A desktop build
without the commands reads as "unsupported", so this can ship before the
desktop side.
- Settings → General (desktop): "Login in the system keychain" status.
Tested: unit tests (fake keychain: store, no rewrite when current, rotation,
clear, unsupported, missing commands, denied write, read-back mismatch,
timeout); a simulated desktop app with a fake keychain, 14/14 (login
mirrors only the secrets, Settings status, reload verifies without
rewriting, logout clears, an existing session is mirrored after upgrade,
Linux/denied show an honest status and stay logged in); the real Linux
desktop binary (commands answer "unsupported", login unaffected, Settings
says so). Unit 1295 pass, Playwright 20 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPmy3tPq869XDW4njjVaKA
Lotus CIandClaude Opus 5.5
jared