gandalf/static/fronts.js

'use strict';
/* exported RACK_FRONTS, CHASSIS_FACEPLATES, rackFrontSvg, shelfSvg, SHELF_GEAR */
// Drawn fronts for rack gear Gandalf can't read a faceplate from: custom-built servers. Chosen per cutsheet item ("Front drawing"). Each one
// shows the device's live status on its power light when the item is linked to a device.
//
// Spec: { label, units, width, height, draw(ctx) -> SVG markup }, ctx: { status, name }.
// Width:height should be about 10.5:1 per rack unit so the drawing fills its slot.

const FRONT_STATUS = { up: '#2fd36b', degraded: '#ffb300', down: '#e0312b' };

function frontLed(status) {
  return FRONT_STATUS[status] || '#6b737d';
}

function ears(w, h, cls = 'rf-ear') {
  // Rack ears with their mounting slots, both sides
  const slots = Array.from({ length: Math.round(h / 105) }, (_, i) => 105 * i + 52);
  const holes = x => slots.map(y => `<rect class="rf-slot" x="${x}" y="${y - 9}" width="9" height="18" rx="4"/>`).join('');
  return `<rect class="${cls}" x="0" y="0" width="34" height="${h}" rx="3"/>${holes(12)}
    <rect class="${cls}" x="${w - 34}" y="0" width="34" height="${h}" rx="3"/>${holes(w - 21)}`;
}

function vents(x0, x1, y, h = 8, gap = 6, seg = 120) {
  const out = [];
  for (let x = x0; x + seg <= x1; x += seg + gap) out.push(`<rect class="rf-vent" x="${x}" y="${y}" width="${seg}" height="${h}" rx="${h / 2}"/>`);
  return out.join('');
}

function powerButton(cx, cy, r, status) {
  return `<circle class="rf-power-ring" cx="${cx}" cy="${cy}" r="${r}" style="stroke:${frontLed(status)}"/>
    <path class="rf-power-icon" d="M${cx - r * 0.35} ${cy - r * 0.3} a${r * 0.48} ${r * 0.48} 0 1 0 ${r * 0.7} 0 M${cx} ${cy - r * 0.55} v${r * 0.5}"/>`;
}

function usbA(x, y) {
  return `<rect class="rf-port" x="${x}" y="${y}" width="22" height="9" rx="1"/><rect class="rf-port-tongue" x="${x + 3}" y="${y + 2}" width="16" height="3"/>`;
}

function usbC(x, y) {
  return `<rect class="rf-port" x="${x}" y="${y}" width="16" height="6" rx="3"/>`;
}

function keyLock(cx, cy) {
  return `<circle class="rf-lock" cx="${cx}" cy="${cy}" r="9"/><rect class="rf-lock-slot" x="${cx - 1.5}" y="${cy - 6}" width="3" height="12" rx="1"/>`;
}

function brand(x, y, text, anchor = 'start') {
  return `<text class="rf-brand" x="${x}" y="${y}" text-anchor="${anchor}">${text}</text>`;
}

function driveBay(x, y, w, h, vertical) {
  // A hot-swap bay: tray face, latch and activity light
  const latch = vertical
    ? `<rect class="rf-latch" x="${x + w / 2 - 6}" y="${y + h - 26}" width="12" height="18" rx="2"/>`
    : `<rect class="rf-latch" x="${x + w - 26}" y="${y + h / 2 - 6}" width="18" height="12" rx="2"/>`;
  const led = vertical ? `<circle class="rf-bay-led" cx="${x + w / 2}" cy="${y + 10}" r="2.5"/>`
    : `<circle class="rf-bay-led" cx="${x + 10}" cy="${y + h / 2}" r="2.5"/>`;
  return `<rect class="rf-bay" x="${x}" y="${y}" width="${w}" height="${h}" rx="3"/>${latch}${led}`;
}

const RACK_FRONTS = {
  // Sliger CX4712 4U with its faceplate off (as driveAtlas draws it): two 5.25" blanks side by
  // side, ten 3.5" hot-swap bays standing on edge in one row, a narrow I/O strip on the right.
  'sliger-cx4712': {
    label: 'Sliger CX4712 4U (10-bay)', units: 4, width: 1100, height: 420,
    draw({ status }) {
      // Bays numbered left to right, the local convention driveAtlas uses for this case
      const bays = Array.from({ length: 10 }, (_, i) => `${driveBay(78 + i * 86, 150, 78, 228, true)}
        <text class="rf-bay-num" x="${117 + i * 86}" y="396" text-anchor="middle">${i + 1}</text>`).join('');
      return `<rect class="rf-body-dark" width="1100" height="420" rx="3"/>${ears(1100, 420, 'rf-ear-dark')}
        <rect class="rf-blank" x="78" y="30" width="418" height="98" rx="3"/>
        <rect class="rf-blank" x="510" y="30" width="418" height="98" rx="3"/>
        ${vents(98, 480, 74, 7, 8, 40)}${vents(530, 912, 74, 7, 8, 40)}
        ${bays}
        <rect class="rf-io" x="950" y="30" width="104" height="360" rx="4"/>
        ${powerButton(1002, 78, 20, status)}
        ${usbA(991, 130)}${usbA(991, 150)}${usbC(995, 176)}
        ${keyLock(1002, 220)}
        ${brand(1002, 372, 'SLIGER', 'middle')}`;
    },
  },

  // Rosewill RSV-L4500U 4U: the perforated, lockable drop-down door over the fan wall
  // (15 bays sit behind it), D-handles on the ears, I/O strip with power and USB on the right.
  'rosewill-rsv-l4500u': {
    label: 'Rosewill RSV-L4500U 4U (15-bay)', units: 4, width: 1100, height: 420,
    draw({ status }) {
      const fan = cx => `<circle class="rf-fan" cx="${cx}" cy="210" r="112"/>
        <circle class="rf-fan-hub" cx="${cx}" cy="210" r="30"/>
        ${[0, 72, 144, 216, 288].map(a => `<path class="rf-fan-blade" transform="rotate(${a} ${cx} 210)" d="M${cx} 180 q40 -40 70 -10 q-30 10 -70 40 z"/>`).join('')}`;
      const handle = x => `<rect class="rf-handle" x="${x}" y="60" width="16" height="300" rx="8"/>`;
      return `<rect class="rf-body-dark" width="1100" height="420" rx="3"/>${ears(1100, 420, 'rf-ear-dark')}
        ${handle(36)}${handle(1048)}
        <defs><pattern id="rf-perf" width="9" height="9" patternUnits="userSpaceOnUse">
          <circle class="rf-perf-hole" cx="4.5" cy="4.5" r="2.4"/></pattern></defs>
        <rect class="rf-door" x="64" y="16" width="880" height="388" rx="6"/>
        ${fan(225)}${fan(504)}${fan(783)}
        <rect class="rf-mesh" x="80" y="32" width="848" height="356" rx="4" fill="url(#rf-perf)"/>
        <rect class="rf-door-latch" x="900" y="180" width="26" height="60" rx="5"/>
        <rect class="rf-io" x="954" y="16" width="86" height="388" rx="4"/>
        ${powerButton(997, 62, 18, status)}
        <circle class="rf-reset" cx="997" cy="104" r="5"/>
        <circle class="rf-led" cx="985" cy="130" r="3.5" style="fill:${frontLed(status)}"/><circle class="rf-led" cx="1009" cy="130" r="3.5"/>
        ${usbA(986, 160)}${usbA(986, 180)}
        ${keyLock(997, 232)}
        ${brand(997, 388, 'ROSEWILL', 'middle')}`;
    },
  },

  // Generic servers, for gear without a specific drawing
  'server-1u': genericServer(1, 4),
  'server-2u': genericServer(2, 12),
  'server-4u': genericServer(4, 24),
};

function genericServer(units, bays) {
  const H = 105 * units;
  return {
    label: `Generic ${units}U server`, units, width: 1100, height: H,
    draw({ status }) {
      const rows = Math.max(1, Math.round(units * 0.75));
      const cols = Math.ceil(bays / rows);
      const bw = Math.min(118, 720 / cols - 8);
      const bh = (H - 30 - (rows - 1) * 8) / rows;
      const out = [];
      for (let r = 0; r < rows; r++) {
        for (let c = 0; c < cols && r * cols + c < bays; c++) out.push(driveBay(60 + c * (bw + 8), 15 + r * (bh + 8), bw, bh, false));
      }
      return `<rect class="rf-body-dark" width="1100" height="${H}" rx="3"/>${ears(1100, H, 'rf-ear-dark')}
        ${out.join('')}
        ${vents(810, 1040, 18, 7, 6, 36)}${units > 1 ? vents(810, 1040, H - 26, 7, 6, 36) : ''}
        ${powerButton(1020, H / 2, Math.min(18, H / 5), status)}`;
    },
  };
}

// Front drawings that are full faceplates in faceplates.js (same parts as the UniFi gear)
const CHASSIS_FACEPLATES = { 'unvr-pro': 'UNVRPRO' };

// The markup for one item's drawn front, or '' when the key is unknown
function rackFrontSvg(key, ctx) {
  const spec = RACK_FRONTS[key];
  if (!spec) return '';
  return `<svg class="rack-svg rack-front" viewBox="0 0 ${spec.width} ${spec.height}" preserveAspectRatio="none"
      role="img" aria-label="${lt.escHtml(`${ctx.name}: ${spec.label}${ctx.status ? `, ${ctx.status}` : ''}`)}">
    <title>${lt.escHtml(`${ctx.name} · ${spec.label}${ctx.status ? ` · ${ctx.status}` : ''}`)}</title>
    ${spec.draw(ctx)}
  </svg>`;
}

// ── IceWhale ZimaBoard 832 (shelf gear) ─────────────────────────────────
// The port end, traced from IceWhale's labelled photo in ZimaDocs
// (source/images/Hardware-Interface-Introduction-/hardware-interface-introduction.webp),
// in that photo's pixel coordinates (the port end spans 862 x 415 px; 81.4 mm wide).
// Left to right: Mini-DisplayPort 1.2, two stacks of GbE RJ45 over USB 3.0, DC 12V 5.5x2.5mm,
// on a gunmetal case over a thin gold PCB edge and the black polycarbonate base.
const ZIMA = { width: 862, height: 415, mm: 81.4 };

function zimaRj45(x, y, link) {
  const contacts = Array.from({ length: 8 }, (_, i) => `<rect class="zb-contact" x="${x + 52 + i * 14}" y="${y + 34}" width="5" height="22"/>`).join('');
  return `<rect class="zb-shield" x="${x}" y="${y}" width="207" height="143" rx="5"/>
    <rect class="zb-hole" x="${x + 22}" y="${y + 30}" width="163" height="102" rx="2"/>
    <rect class="zb-hole-key" x="${x + 70}" y="${y + 120}" width="67" height="16" rx="1"/>
    ${contacts}
    <rect class="zb-led" x="${x + 16}" y="${y + 9}" width="30" height="15" rx="2" style="fill:${link ? '#3ad16b' : '#8f8f8a'}"/>
    <rect class="zb-led" x="${x + 161}" y="${y + 9}" width="30" height="15" rx="2" style="fill:${link ? '#f2d13a' : '#77714a'}"/>`;
}

function zimaUsb(x, y) {
  return `<rect class="zb-shield" x="${x}" y="${y}" width="204" height="100" rx="5"/>
    <rect class="zb-hole" x="${x + 26}" y="${y + 20}" width="152" height="62" rx="2"/>
    <rect class="zb-usb-tongue" x="${x + 38}" y="${y + 28}" width="128" height="22" rx="2"/>
    ${Array.from({ length: 5 }, (_, i) => `<rect class="zb-usb-pin" x="${x + 50 + i * 24}" y="${y + 46}" width="10" height="4"/>`).join('')}`;
}

function zimaFront(ctx) {
  // ctx: { status, interfaces: [{name, up}] } - one RJ45 per NIC, left to right
  const nics = ctx.interfaces || [];
  const link = i => (nics[i] ? nics[i].up : ctx.status === 'up');
  const on = ctx.status === 'up' || ctx.status === 'degraded';
  const pads = [60, 105, 420, 470, 640, 700, 790, 835]
    .map(x => `<rect class="zb-pad" x="${x}" y="309" width="12" height="7"/>`).join('');
  return `
    <rect class="zb-base" x="0" y="300" width="862" height="115" rx="10"/>
    <rect class="zb-base-sheen" x="6" y="330" width="850" height="6" rx="3"/>
    ${on ? '<ellipse class="zb-glow" cx="34" cy="404" rx="34" ry="9"/>' : ''}
    <rect class="zb-pcb" x="2" y="306" width="858" height="12"/>${pads}
    <path class="zb-case" d="M0 14 Q0 0 14 0 H848 Q862 0 862 14 V308 H0 Z"/>
    <rect class="zb-case-edge" x="0" y="6" width="18" height="300"/>
    <rect class="zb-case-top" x="14" y="0" width="834" height="5"/>
    <rect class="zb-shield" x="63" y="225" width="127" height="80" rx="6"/>
    <path class="zb-hole" d="M75 243 H178 V280 L163 293 H90 L75 280 Z"/>
    <rect class="zb-dp-pins" x="92" y="262" width="69" height="9" rx="1"/>
    ${zimaRj45(213, 47, link(0))}${zimaRj45(443, 47, link(1))}
    ${zimaUsb(216, 205)}${zimaUsb(443, 205)}
    <rect class="zb-dc" x="678" y="177" width="132" height="130" rx="8"/>
    <rect class="zb-dc-face" x="690" y="189" width="108" height="106" rx="6"/>
    <circle class="zb-dc-ring" cx="744" cy="242" r="36"/>
    <circle class="zb-hole" cx="744" cy="242" r="27"/>
    <circle class="zb-dc-pin" cx="744" cy="242" r="8"/>`;
}

const SHELF_GEAR = {
  'zimaboard-832': {
    label: 'IceWhale ZimaBoard 832', mm: ZIMA.mm, width: ZIMA.width, height: ZIMA.height, draw: zimaFront,
    specs: 'Intel Celeron N3450, 8GB LPDDR4, 32GB eMMC, 2x GbE, 2x USB 3.0, 2x SATA, PCIe 2.0 x4, 6W',
  },
};

// A shelf at true scale (1100 units = 482.6 mm, a 19" panel) with what sits on it, left to right.
// Gear with a SHELF_GEAR drawing is drawn to its real width; anything else is a labelled box.
function shelfSvg(item, esc) {
  const units = item.rack_height || 1;
  const W = 1100, H = 105 * units, perMm = W / 482.6;
  const floor = H - 20;
  let x = 64;
  const things = (item.contents || []).map(c => {
    const gear = SHELF_GEAR[c.chassis];
    const w = gear ? gear.mm * perMm : 150;
    const k = gear ? w / gear.width : 1;
    const h = gear ? gear.height * k : 58;
    const top = floor - h;
    const nics = (c.interfaces || []).map(n => `${n.name} ${n.up ? 'up' : 'down'}`).join(', ');
    const tip = [c.name, gear ? gear.label : c.kind, c.status, nics, gear && gear.specs].filter(Boolean).join(' · ');
    const body = gear
      ? `<g transform="translate(${x} ${top}) scale(${k})">${gear.draw(c)}</g>`
      : `<rect class="sh-box" x="${x}" y="${top}" width="${w}" height="${h}" rx="4"/>
         <text class="sh-box-name" x="${x + w / 2}" y="${top + h / 2 + 5}" text-anchor="middle">${esc(c.name)}</text>`;
    const out = `<a class="sh-thing" href="${esc(c.url)}"><title>${esc(tip)}</title>
        ${body}
        <rect class="sh-hit" x="${x - 4}" y="${top - 4}" width="${w + 8}" height="${h + 8}" rx="4"/>
        <rect class="sh-tag" x="${x + w / 2 - 46}" y="${floor + 5}" width="92" height="12" rx="2"/>
        <text class="sh-tag-text" x="${x + w / 2}" y="${floor + 14}" text-anchor="middle">${esc(c.name)}</text>
      </a>`;
    x += w + 26;
    return out;
  }).join('');
  return `<svg class="rack-svg rack-shelf-svg" viewBox="0 0 ${W} ${H}" preserveAspectRatio="none" role="group"
      aria-label="${esc(item.name)}">
    <title>${esc(item.name)}</title>
    ${ears(W, H, 'rf-ear-dark')}
    <rect class="sh-back" x="36" y="6" width="${W - 72}" height="${floor - 6}"/>
    <rect class="sh-floor" x="30" y="${floor}" width="${W - 60}" height="${H - floor - 2}" rx="2"/>
    <rect class="sh-lip" x="30" y="${floor}" width="${W - 60}" height="3"/>
    ${things || `<text class="sh-empty" x="${W / 2}" y="${floor - 12}" text-anchor="middle">empty shelf</text>`}
    <text class="sh-name" x="46" y="18">${esc(item.name)}</text>
  </svg>`;
}