247 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
jared	390748173c	Merge pull request 'Docs: micro1 is now monitor-01' (#38) from rename/micro1-to-monitor-01 into main deploy-2026.11.14-591	2026-11-14 17:55:49 -05:00
jaredandClaude Opus 5.5	64eba37f81	Docs: micro1 is now monitor-01 ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-14 17:46:56 -05:00
jared	0631de74c7	Merge pull request 'Dashboard: flag stale alerts and tickets left open' (#37) from stale-alerts into main deploy-2026.11.14-582	2026-11-14 16:16:29 -05:00
jaredandClaude Opus 5.5	0921e82c54	Dashboard: flag stale alerts and tickets left open ... Gandalf only comments on tickets, so a ticket can stay open long after its alert cleared (pbs's ticket sat open for a month), and an alert can stay active for days once nobody is looking. - The monitor reads Tinker's open ticket list (tickets_api.php, read scope) every 15 minutes and saves it. A failed read keeps the previous list. - Active alerts get a stale badge after monitor.stale_alert_days (3), and a "ticket closed" badge when their ticket was closed while still active. - A Needs Follow-up panel lists open tickets whose every alert cleared at least monitor.stale_ticket_hours (24) ago. - A "TO FOLLOW UP" status chip counts both. If the open ticket list is over 2 hours old, the ticket flags are left off rather than guessed. - Replaced an &mdash; in the alert count notice. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-14 15:57:58 -05:00
jared	7b80633088	Merge pull request 'WAN tickets: one per incident, notice UniFi updates, maintenance button' (#36) from wan-incidents into main deploy-2026.11.12-573	2026-11-12 13:46:31 -05:00
jaredandClaude Opus 5.5	379e3be365	WAN tickets: one per incident, notice UniFi updates, maintenance button ... A UniFi Network update on 2026-11-12 dropped the UDM's WAN, Smart Power power-cycled the modem, and Gandalf opened two tickets for the one event. - Modem and WAN reports from one check cycle open a single ticket, led by the most urgent, with the rest listed under "Also seen in this incident". A report while the modem has an open alert, or one that ended under 30 minutes ago, becomes a comment on that ticket instead. - UniFi update log entries (NETWORK_UPDATED, FIRMWARE_UPDATED_V2 and the like) add a note to modem/WAN tickets from 20 minutes before the update to 15 after, and hold new modem/WAN tickets for 15 minutes. - A Maintenance button for admins starts a global suppression for 30 min to 4 hours, with a banner on every page and End now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-12 12:53:22 -05:00
jared	6b03fe7b44	Merge pull request 'Mark host interfaces as unused' (#35) from unused-interfaces into main deploy-2026.11.11-564	2026-11-11 17:50:14 -05:00
jaredandClaude Opus 5.5	3834546f38	Mark host interfaces as unused ... Ports that are never meant to be up (compute-storage-01 nic1-3, large1's spare NIC and USB adapter) kept their hosts "degraded" and were the source of tonight's false alerts. An admin can now mark an interface unused from the device page, with an optional reason. Unused interfaces raise no link-down alerts, don't count toward the cluster-wide alert or the host's status, and show greyed as "unused" on the dashboard, device page and rack. Marking one closes any open link-down alert on it without a recovery note. New table unused_interfaces, created with the cutsheet tables. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 17:19:45 -05:00
jared	aeb7a89e81	Merge pull request 'Rack: Flex Mini on the NVR, coloured Sliger fronts, UniFi brush panel' (#32) from loose-gear-on-top into main deploy-2026.11.11-555	2026-11-11 02:09:38 -05:00
jared	9bdf5d9eed	Merge pull request 'Tickets: don't adopt a Closed ticket Tinker couldn't reopen' (#34) from tinker-create-action into main deploy-2026.11.11-552	2026-11-11 02:01:10 -05:00
jaredandClaude Opus 5.5	cbdae54d70	Rack: brush panel opening runs nearly the full width between the ears ... As in Ubiquiti's product image and the rack photo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:57:19 -05:00
jaredandClaude Opus 5.5	36cbdd061d	Rack: brush panel holds up at rack size ... The bristles were hundreds of hard strands, which aliased into flat stripes at normal rack size. Each row is now shaded root to tip with a faint strand texture over it, so the panel looks the same at any size. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:56:24 -05:00
jaredandClaude Opus 5.5	6e6150f9b9	Rack: rack handles on the Sliger ears ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:55:12 -05:00
jaredandClaude Opus 5.5	d234e36e3f	Tickets: don't adopt a Closed ticket Tinker couldn't reopen ... Tinker's create response says what it did (action). For recurrence_noted it matched a Closed ticket it could not reopen unattended: that ticket isn't tracking the alert (this is what hid micro1 enp3s0 behind an old reboot ticket), so Gandalf now logs it and keeps no ticket for the alert. Each such create adds a "recurred" comment to the closed ticket, so the same title is retried once a day rather than every poll. Other actions are logged. See tinker_tickets#116 and #115. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:52:53 -05:00
jaredandClaude Opus 5.5	7408b1feca	Rack: Sliger fronts in red, white and blue, and the UniFi brush panel ... From the rack photo on the wiki, the three Sligers have their coloured perforated fronts fitted, not the faceplate-off view: Front drawings "Sliger CX4712 4U, red/white/blue front" draw the hex-perforated panel (about 20 rows of holes, the drive cages faint behind it), black rack ears, the power button with Gandalf's status ring, and the USB recess. UniFi UACC-Rack-Panel-Brush-1U is drawn from Ubiquiti's product images: silver face, ear plates with rounded slots, a recessed chamfered frame and two rows of bristles meeting at a seam. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:51:29 -05:00
jared	64ef4222d0	Merge remote-tracking branch 'origin/main' into loose-gear-on-top	2026-11-11 01:48:37 -05:00
jared	fde1d01f27	Merge pull request 'Revert #31: revived glitch alerts opened tickets' (#33) from revert-31 into main deploy-2026.11.11-519	2026-11-11 01:17:47 -05:00
jaredandClaude Opus 5.5	8edaa78ad7	Revert #31: open link-down alerts from a monitor glitch were revived and ticketed ... #31 treated any open interface_down alert as previously up. Production had six such alerts all created in the same second on 2026-03-02 (a monitor glitch, on ports that were never in use: large1 enp36s0 and a USB adapter, compute-storage-01 nic1-3, micro1 enp3s0). Reviving them opened per-host tickets and a P1 cluster-wide ticket. Back to the previous behaviour while a safer fix is worked out. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:11:00 -05:00
jaredandClaude Opus 5.5	3bc8df6dc7	Tests: wrap a long line ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:08:52 -05:00
jaredandClaude Opus 5.5	d8e827c88b	Rack: gear resting on other gear, and live desk switches on shelves ... A USW Flex Mini lies on top of the NVR. A shelf item with Front drawing "No shelf: gear resting on what is below" draws no tray or ears, so its contents sit directly on the item under it. UniFi desk switches on a shelf (Flex Mini, Flex) are drawn with their live faceplate, scaled to their real width from Ubiquiti's tech specs (107 mm and 122.5 mm), with working ports. faceplateSvg() returns a faceplate's SVG on its own so it can be placed inside the shelf drawing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:08:42 -05:00
jared	a0e062493d	Merge pull request 'Monitor: keep checking interfaces whose link-down alert is still open' (#31) from stale-interface-alerts into main deploy-2026.11.11-501	2026-11-11 01:06:37 -05:00
jaredandClaude Opus 5.5	d07787ee38	Monitor: keep checking interfaces whose link-down alert is still open ... After the interface baseline is reset, a port that is already down reads as "first seen down", which neither alerts nor resolves. An alert opened before the reset was then stuck open without updates: micro1's enp3s0 had sat at one failed check since March with no ticket. An interface with an open interface_down alert is now treated as previously up, so the alert keeps counting, tickets and resolves as normal. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:02:53 -05:00
jared	7e75ba8b3c	Merge pull request 'Rack: posts vs facing, three views, ZimaBoard 832 shelves to scale' (#30) from zimaboard-and-facing into main deploy-2026.11.11-492	2026-11-11 00:53:41 -05:00
jared	0243b23732	Merge remote-tracking branch 'origin/main' into zimaboard-and-facing ... # Conflicts: # static/style.css # tests/test_cutsheet.py	2026-11-11 00:46:13 -05:00
jared	90e051dc22	Merge pull request 'Faceplates: USW Pro Max 24 PoE and 48 PoE' (#29) from pro-max-faceplates into main deploy-2026.11.11-483	2026-11-11 00:45:49 -05:00
jaredandClaude Opus 5.5	486a93c5a0	Rack: ConnectX-3 SFP+ cards in the ZimaBoards' PCIe slots; correct NIC mapping ... From the rack photo, each ZimaBoard has a single-port ConnectX-3 lying flat in its side PCIe slot with a DAC attached. Front drawing "ZimaBoard 832 + ConnectX-3" draws the card beside the board at scale: PCB at board height, heatsink, SFP+ cage with the DAC and pull tab, and a Gandalf link mark for the card's interface. The jacks were lit in NIC name order, which put the ConnectX-3 (enp1s0, PCI bus 1) on the left RJ45. The onboard ports are enp2s0 (left) and enp3s0 (right); the PCIe card is enp1s0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:35:25 -05:00
jaredandClaude Opus 5.5	a9de175d90	Rack: ports-facing separate from posts, three views, ZimaBoard 832 shelves to scale ... Gear on the rear posts usually still faces the front (the StarTech's RPDU and ZimaBoard shelf), so "which posts" and "which way the ports face" are now separate fields (mount, facing). The page has three views: Front (front posts), Rear posts (rear-post gear seen from the front, i.e. what is behind the front gear) and Rear (from behind). An item seen from the side it doesn't face shows its back. Facing defaults to front, so existing items keep their meaning. Shelves are drawn at true scale with their contents ordered by a new "Position on shelf". The IceWhale ZimaBoard 832 is traced from IceWhale's labelled photo of its port end (ZimaDocs): Mini-DP, two RJ45-over-USB 3.0 stacks with link/activity LEDs, DC jack, gunmetal case, gold PCB edge and black base. Its RJ45 link lights follow the host's physical NICs and the status glow follows the host. New cutsheet_items columns facing and slot, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:12:07 -05:00
jaredandClaude Opus 5.5	ce12dede5f	Faceplates: USW Pro Max 24 PoE and 48 PoE ... Both laid out from the CC0 NetBox devicetype-library images, with jack centres measured from them: the 24 has one row of 24 RJ45 in groups of 8 (17-24 at 2.5G) and 2 SFP+; the 48 has two rows, odd ports on top, in groups of 16 (33-48 at 2.5G) and 4 SFP+ (49-52). The "2.5G" and "10G" bars under the faster ports are drawn too (fpSpeedBar). Registered as USPM24P/USPM48P with USPM24/USPM48 aliases, and as Front drawing options so the new switch draws on the rack before it is adopted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:01:12 -05:00
jared	6530433d9c	Merge pull request 'Rack: clicking a port on an unlinked faceplate opens the cutsheet' (#28) from rack-unlinked-port-clicks into main deploy-2026.11.11-462	2026-11-10 23:54:51 -05:00
jaredandClaude Opus 5.5	5fdd317539	Rack: clicking a port on an unlinked faceplate opens the cutsheet ... The NVR Pro is drawn by Front drawing because UniFi doesn't report it, so it has no device page; clicking one of its ports went to /device/UNVR-Pro and showed "No device with this name". Ports on a faceplate whose item isn't linked to a live device now open the port's cable when one is documented, and otherwise the item on the cutsheet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:53:18 -05:00
jared	3e2918526f	Merge pull request 'Rack: drawn fronts (NVR Pro, UACC panel, server cases), faceplate labels, no em/en dashes' (#27) from rack-drawn-fronts into main deploy-2026.11.11-453	2026-11-10 23:45:36 -05:00
jaredandClaude Opus 5.5	50db56cdcb	Rack: draw the UniFi UACC blank 24-port keystone patch panel ... Front drawing "UniFi Patch Panel Blank 24" draws the real panel, laid out from the CC0 NetBox devicetype-library image: grey steel face, darker ears with oval holes, 24 keystone openings with the cable-support bar behind them, and a cable slot at each end. Ports with a documented cable get a keystone jack; cutsheet marks, port labels and run highlighting work as on the generic panel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:39:27 -05:00
jaredandClaude Opus 5.5	619a2c913d	Remove em and en dashes from the UI, code and docs ... Page titles read "Rack | GANDALF", ranges use a hyphen (U26-42, 1-100 of 300), empty cells show "-", and dash-separated phrases use a colon, comma or full stop. In the shared base.js only the on-screen strings changed (boot line, placeholders, offline banner and toast). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:37:56 -05:00
jaredandClaude Opus 5.5	3c9e5fd593	Faceplates: model labels as printed on the units ... The label under each UniFi screen was one weight, left-aligned, and on the UDM read "Dream Machine Pro". Checked against the NetBox reference photos (and the UDM against the real unit), the labels are now centred under the screen with the first word bold and the rest light: "UDM Pro", "USW Pro" with its PoE mark, "USW", "NVR Pro", "USP PDU Pro". One helper (fpModel) draws them all, so the NVR no longer looks bolder than the switches. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:36:23 -05:00
jaredandClaude Opus 5.5	565fdd81de	Rack: NVR Pro as a real faceplate; Sliger and Rosewill touch-ups ... The hand-drawn NVR Pro didn't match the UniFi faceplates: flat colours, low contrast and its own port shapes. It is now a FACEPLATES entry (UNVRPRO) built from the same parts as the UDM Pro: metal body, RJ45 jack, SFP+ cage, quad screen, vents and labels. Front drawing "UniFi NVR Pro" uses it, and it would go live if UniFi ever reports the model. Sliger bays are numbered 1-10 (driveAtlas's order); the Rosewill door is perforated with a latch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:31:19 -05:00
jaredandClaude Opus 5.5	0f4e129c20	Rack: drawn fronts for the NVR and server cases ... Items Gandalf has no live faceplate for can pick a Front drawing: the UniFi NVR Pro (drawn from the CC0 NetBox devicetype-library image), the Sliger CX4712 4U and Rosewill RSV-L4500U 4U cases (from driveAtlas's layouts), and generic 1U/2U/4U servers. The power light shows the linked device's live status. They export with the rest of the rack. New cutsheet_items column chassis, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:25:02 -05:00
jared	b416239438	Merge pull request 'Rack: put a patch panel's name above its ports' (#26) from rack-panel-label into main deploy-2026.11.11-420	2026-11-10 23:20:22 -05:00
jaredandClaude Opus 5.5	97e6692ebf	Rack: put a patch panel's name above its ports ... A long panel name (UACC-Rack-Panel-Patch-Blank-24) was drawn in the left ear at full size and ran under the ports. It is now a small caption in the panel's top-left corner, shortened past 48 characters with the full name in its tooltip. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:02:18 -05:00
jared	bee260f1cd	Merge pull request 'Rack: front and rear mounting, rack settings on the page' (#25) from rack-rear-and-settings into main deploy-2026.11.11-411	2026-11-10 22:52:15 -05:00
jaredandClaude Opus 5.5	c50e1f8322	Rack: front and rear mounting, rack settings in the page ... Items are mounted from the front, the rear, or full depth. On a 4-post rack a front and a rear item can share a unit; a full-depth one takes both sides, and the rear view shows its back. Overlaps are checked per side. Shelf contents take the shelf's side. A Front / Rear switch flips the drawing. Racks are saved in Gandalf (new cutsheet_racks table) and edited on the rack page by admins: name, height, notes, add and delete. Renaming moves the rack's items; saving the first rack carries over the items of the config default it replaces. Config racks remain the fallback. Faceplates are stretched to the full width only when the drawing is close to the slot's proportions, so the PDU is not squashed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 22:35:37 -05:00
jared	cd3d2f05ee	Merge pull request 'Rack: device links, shelves, multiple racks, export; layout and light-mode fixes' (#24) from racks-shelves-export into main deploy-2026.11.11-402	2026-11-10 22:29:38 -05:00
jaredandClaude Opus 5.5	bdd68a397d	Rack: link items to devices, shelves, several racks, export; fix layout and light mode ... Cutsheet items gain a "Gandalf device" link, so an item named after the product (UDM-Pro) shows the live device's faceplate, ports and status. Cable checks, suggestions, tickets and the device page treat an item and its linked device as one. Without this, product-named items drew as bare name plates. Items can sit on a shelf instead of a rack unit; the shelf draws what is on it with live status. Items have a rack, the page shows a tab per rack (config "racks"), and a rack can be downloaded as SVG or PNG. The rack is centred, long runs of empty units fold into one band (with a toggle), every device fills the 19" width, the UPS shows its front only, and the rack keeps its own palette so it reads in light mode. New cutsheet_items columns rack, shelf and device are added on first use. Deleting a shelf, or making it something else, is refused while it holds items; renaming it carries over. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 21:44:59 -05:00
jared	4f353888f8	Merge pull request 'Rack drawing (/rack)' (#23) from rack-view into main deploy-2026.11.11-393	2026-11-10 21:33:29 -05:00
jaredandClaude Opus 5.5	f655836446	Add a rack drawing (/rack) ... The rack front is drawn from the rack units on cutsheet items. Switches with a faceplate use it, with live port state; patch panels get a generic panel with port labels; everything else is a labelled plate. Each documented port shows its cutsheet state, and hovering a port lights up every port on the same cable run (through patch panels) and names the cables. Clicking opens the switch port or the cable. Overlapping items and items past the top of the rack are listed instead of drawn over another; where two claim the same top unit, the first one recorded wins. rack.units sets the height (default 42). /api/rack builds on the cutsheet view; cutsheet.rack_layout and cutsheet.port_marks hold the placement and per-port logic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:59:30 -05:00
jared	ee2708dccb	Merge pull request 'Inventory links, cutsheet marks on faceplates, single page titles' (#22) from inventory-and-faceplate-marks into main deploy-2026.11.11-384	2026-11-10 20:50:26 -05:00
jaredandClaude Opus 5.5	c262e5ecc8	Inventory links, cutsheet marks on faceplates, and single page titles ... Device pages get an Inventory button: it opens the device's HomeBox record once an admin pastes its URL (stored in the new device_links table; only URLs on inventory.base_url are accepted), and searches the inventory for the model until then. Tickets link the record too. Faceplate ports with a documented cable get a corner dot: green matches, red mismatch, grey documented but unconfirmed. The port's tooltip names the cable, and a legend toggle (remembered per browser) hides them. Page titles no longer repeat GANDALF ("Alert History - GANDALF - GANDALF"). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:47:14 -05:00
jared	29119c2235	Merge pull request 'Alert history page and a tighter monitor health check' (#21) from events-history into main deploy-2026.11.11-375	2026-11-10 20:37:45 -05:00
jaredandClaude Opus 5.5	9d561db703	Add an alert history page and tie /health staleness to the poll interval ... /events lists every alert from the last 24 hours to 90 days, open or cleared, with how long each lasted, failed checks and its ticket. Filters (device, type, severity, state, range) live in the URL, so device pages and tickets link straight to a device's history. A "Recurring" table lists alerts that fired more than once on the same target. On phones the rows become cards. /api/events/history backs it (100 per page). The existing /api/events is unchanged. /health and the dashboard's monitor indicator now call the monitor stalled after five missed polls (at least 10 minutes) instead of a fixed 20, and /health reports the monitor's age. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:29:09 -05:00
jared	9e2a2b987c	Merge pull request 'Recovery notes and fuller context on tickets' (#20) from ticket-recovery-and-context into main deploy-2026.11.11-366	2026-11-10 20:09:03 -05:00
jaredandClaude Opus 5.5	437f7a415f	Add recovery notes and fuller context to tickets ... When an alert that opened a ticket clears, the monitor now comments on the ticket (when it cleared, how long it lasted, failed checks, a link back). It never closes or changes a ticket's status. Failed notes retry each cycle for 24 hours; a 401/403 from Tinker stops them until restart. Tickets are now Markdown with a "What to check" list and, where known: the switch port the device plugs into (kept from the last time it was seen, so a dead host still shows it), cutsheet cables and their path, how often the alert fired in the last 7/30 days, other open alerts on the device, and links into Gandalf (gandalf.public_url). Titles are unchanged so Tinker's duplicate detection still works. network_events gains recovery_notified, added at monitor startup; rows that cleared before the upgrade count as already notified. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 19:44:50 -05:00