Drive Atlas

A powerful server drive mapping tool that generates visual ASCII representations of server layouts and provides comprehensive drive information. Maps physical drive bays to logical Linux device names using PCI bus paths for reliable, persistent identification.

Features

• Visual ASCII art maps showing physical drive bay layouts
• Persistent drive identification using PCI paths (not device letters)
• SMART health status and temperature monitoring
• Support for SATA, NVMe, and USB drives
• Detailed drive information including model, size, and health status
• Per-server configuration for accurate physical-to-logical mapping

Quick Start

Execute remotely using curl:

bash <(curl -s http://10.10.10.63:3000/LotusGuild/driveAtlas/raw/branch/main/driveAtlas.sh)

Or using wget:

bash <(wget -qO- http://10.10.10.63:3000/LotusGuild/driveAtlas/raw/branch/main/driveAtlas.sh)

Requirements

• Linux environment with bash
• sudo privileges for SMART operations
• smartctl (from smartmontools package)
• lsblk and lspci (typically pre-installed)
• Optional: nvme-cli for NVMe drives

Server Configurations

Chassis Types

Chassis Type	Description	Servers Using It
10-Bay Hot-swap	Sliger CX471225 4U 10x 3.5" NAS (with unused 2x 5.25" bays)	compute-storage-01, compute-storage-gpu-01, storage-01
Large1 Grid	Unique 3x5 grid layout (1/1 configuration)	large1
Micro	Compact 2-drive layout	micro1, monitor-02

Server Details

compute-storage-01 (formerly medium2)

• Chassis: Sliger CX471225 4U (10-Bay Hot-swap)
• Motherboard: B650D4U3-2Q/BCM
• Controllers:
  • 01:00.0 - LSI SAS3008 HBA (bays 5-10 via 2x mini-SAS HD)
  • 0d:00.0 - AMD SATA controller (bays 1-4)
  • 0e:00.0 - M.2 NVMe slot
• Status: Fully mapped

storage-01

• Chassis: Sliger CX471225 4U (10-Bay Hot-swap)
• Motherboard: Different from compute-storage-01
• Controllers: Motherboard SATA only (no HBA currently)
• Status: Requires PCI path mapping

large1

• Chassis: Unique 3x5 grid (15 bays total)
• Note: 1/1 configuration, will not be replicated
• Status: Requires PCI path mapping

compute-storage-gpu-01

• Chassis: Sliger CX471225 4U (10-Bay Hot-swap)
• Motherboard: Same as compute-storage-01
• Status: Requires PCI path mapping

How It Works

PCI Path-Based Mapping

Drive Atlas uses /dev/disk/by-path/ to create persistent mappings between physical drive bays and Linux device names. This is superior to using device letters (sda, sdb, etc.) which can change between boots.

Example PCI path:

pci-0000:0c:00.0-ata-1 → /dev/sda

This tells us:

• 0000:0c:00.0 - PCI bus address of the storage controller
• ata-1 - Port 1 on that controller
• Maps to physical bay 3 on compute-storage-01

Configuration

Server mappings are defined in the SERVER_MAPPINGS associative array in driveAtlas.sh:

declare -A SERVER_MAPPINGS=(
    ["compute-storage-01"]="
        pci-0000:0c:00.0-ata-1 3
        pci-0000:0c:00.0-ata-2 4
        pci-0000:0d:00.0-nvme-1 m2-1
    "
)

Setting Up a New Server

Step 1: Run Diagnostic Script

First, gather PCI path information:

bash diagnose-drives.sh > server-diagnostic.txt

This will show all available PCI paths and their associated drives.

Step 2: Physical Bay Identification

For each populated drive bay:

1. Note the physical bay number (labeled on chassis)
2. Identify a unique characteristic (size, model, or serial number)
3. Match it to the PCI path from the diagnostic output

Pro tip: If uncertain, remove one drive at a time and re-run the diagnostic to see which PCI path disappears.

Step 3: Create Mapping

Add a new entry to SERVER_MAPPINGS in driveAtlas.sh:

["your-hostname"]="
    pci-0000:XX:XX.X-ata-1 1
    pci-0000:XX:XX.X-ata-2 2
    # ... etc
"

Also add the chassis type to CHASSIS_TYPES:

["your-hostname"]="10bay"

Step 4: Test

Run the main script and verify the layout matches your physical configuration:

bash driveAtlas.sh

Use debug mode to see the mappings:

DEBUG=1 bash driveAtlas.sh

Output Example

┌──────────────────────────────────────────────────────────────┐
│  compute-storage-01                                          │
│  10-Bay Hot-swap Chassis                                     │
│                                                              │
│    M.2 NVMe Slot                                             │
│    ┌──────────┐                                             │
│    │ nvme0n1  │                                             │
│    └──────────┘                                             │
│                                                              │
│    Front Hot-swap Bays                                       │
│ ┌──────────┐┌──────────┐┌──────────┐┌──────────┐...        │
│ │1: EMPTY  ││2: EMPTY  ││3: sda    ││4: sdb    │...        │
│ └──────────┘└──────────┘└──────────┘└──────────┘...        │
└──────────────────────────────────────────────────────────────┘

=== Drive Details with SMART Status ===
DEVICE          SIZE       TYPE     TEMP     HEALTH   MODEL
--------------------------------------------------------------------------------
/dev/sda        2TB        HDD      35°C     ✓        WD20EFRX-68EUZN0
/dev/nvme0n1    1TB        SSD      42°C     ✓        Samsung 980 PRO

Troubleshooting

Drive shows as EMPTY but is physically present

• Check if the drive is detected: ls -la /dev/disk/by-path/
• Verify the PCI path in the mapping matches the actual path
• Ensure the drive has power and SATA/power connections are secure

PCI paths don't match between servers with "identical" hardware

• Even identical motherboards can have different PCI addressing
• BIOS settings can affect PCI enumeration
• HBA installation in different PCIe slots changes addresses
• Cable routing to different SATA ports changes the ata-N number

SMART data not showing

• Ensure smartmontools is installed: sudo apt install smartmontools
• Some drives don't report temperature
• USB-connected drives may not support SMART
• Run sudo smartctl -i /dev/sdX manually to check

Files

• driveAtlas.sh - Main script
• diagnose-drives.sh - PCI path diagnostic tool
• README.md - This file
• todo.txt - Development notes

Contributing

When adding support for a new server:

1. Run diagnose-drives.sh and save output
2. Physically label or identify drives
3. Create mapping in SERVER_MAPPINGS
4. Test thoroughly
5. Document any unique hardware configurations
6. Update this README

Technical Notes

Why PCI Paths?

Linux device names (sda, sdb, etc.) are assigned in discovery order, which can change:

• Between kernel versions
• After BIOS updates
• When drives are added/removed
• Due to timing variations at boot

PCI paths are deterministic and based on physical hardware topology.

Bay Numbering Conventions

• 10-bay chassis: Bays numbered 1-10 (left to right, top to bottom)
• M.2 slots: Labeled as m2-1, m2-2, etc.
• USB drives: Labeled as usb1, usb2, etc.
• Large1: Grid numbering 1-9 (3x3 displayed, additional bays documented in mapping)

License

Internal tool for LotusGuild infrastructure.