jared
4a1998046b
Lint / Python (flake8) (push) Failing after 2m9s
Lint / JS (eslint) (push) Successful in 11s
Lint / Deploy (push) Skipped
Security / Python Security (bandit) (push) Successful in 39s
Test / Python Tests (pytest) (push) Successful in 40s
Lint / Notify on failure (push) Successful in 3s
116 lines
3.9 KiB
Python
116 lines
3.9 KiB
Python
"""Minimal stand-in for the PULSE internal API, returning canned diagnostics output (fictional data)."""
|
|
import json
|
|
from http.server import BaseHTTPRequestHandler, HTTPServer
|
|
CANNED = """=== carrier ===
|
|
1
|
|
=== operstate ===
|
|
up
|
|
=== sysfs_stats ===
|
|
rx_bytes:9183029113
|
|
tx_bytes:7732918231
|
|
rx_errors:14
|
|
tx_errors:0
|
|
rx_dropped:0
|
|
tx_dropped:0
|
|
rx_crc_errors:14
|
|
rx_frame_errors:0
|
|
rx_fifo_errors:0
|
|
tx_carrier_errors:0
|
|
collisions:0
|
|
rx_missed_errors:0
|
|
=== carrier_changes ===
|
|
6
|
|
=== ethtool ===
|
|
Settings for enp5s0:
|
|
Supported ports: [ FIBRE ]
|
|
Supported link modes: 10000baseT/Full
|
|
Speed: 10000Mb/s
|
|
Duplex: Full
|
|
Port: FIBRE
|
|
PHYAD: 0
|
|
Auto-negotiation: off
|
|
Link detected: yes
|
|
=== ethtool_driver ===
|
|
driver: ixgbe
|
|
version: 6.8.12-4-pve
|
|
firmware-version: 0x800003e1, 1.3429.0
|
|
bus-info: 0000:05:00.0
|
|
=== ethtool_pause ===
|
|
Pause parameters for enp5s0:
|
|
Autonegotiate: off
|
|
RX: off
|
|
TX: off
|
|
=== ethtool_ring ===
|
|
Ring parameters for enp5s0:
|
|
Pre-set maximums:
|
|
RX: 8192
|
|
RX Mini: n/a
|
|
RX Jumbo: n/a
|
|
TX: 8192
|
|
Current hardware settings:
|
|
RX: 512
|
|
RX Mini: n/a
|
|
RX Jumbo: n/a
|
|
TX: 512
|
|
=== ethtool_stats ===
|
|
NIC statistics:
|
|
rx_packets: 183029113
|
|
tx_packets: 120918231
|
|
rx_errors: 14
|
|
tx_errors: 0
|
|
rx_crc_errors: 14
|
|
rx_missed_errors: 0
|
|
tx_timeout_count: 0
|
|
fdir_match: 41022
|
|
tx_flow_control_xon: 0
|
|
rx_flow_control_xon: 0
|
|
=== ethtool_dom ===
|
|
Identifier : 0x03 (SFP)
|
|
Connector : 0x07 (LC)
|
|
Vendor name : FS
|
|
Vendor PN : SFP-10GSR-85
|
|
Laser wavelength : 850nm
|
|
Laser bias current : 6.100 mA
|
|
Laser output power : 0.5530 mW / -2.57 dBm
|
|
Receiver signal average optical power : 0.0120 mW / -19.21 dBm
|
|
Module temperature : 47.50 degrees C / 117.50 degrees F
|
|
Module voltage : 3.3120 V
|
|
=== ip_link ===
|
|
5: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq master vmbr1 state UP mode DEFAULT group default qlen 1000
|
|
link/ether 02:00:5e:10:00:05 brd ff:ff:ff:ff:ff:ff
|
|
RX: bytes packets errors dropped missed mcast
|
|
9183029113 183029113 14 0 0 10234
|
|
TX: bytes packets errors dropped carrier collsns
|
|
7732918231 120918231 0 0 0 0
|
|
=== ip_addr ===
|
|
5: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq master vmbr1 state UP group default qlen 1000
|
|
link/ether 02:00:5e:10:00:05 brd ff:ff:ff:ff:ff:ff
|
|
=== ip_route ===
|
|
=== dmesg ===
|
|
[ 412.118233] ixgbe 0000:05:00.0 enp5s0: NIC Link is Up 10 Gbps, Flow Control: None
|
|
[1188221.402917] ixgbe 0000:05:00.0 enp5s0: NIC Link is Down
|
|
[1188224.190331] ixgbe 0000:05:00.0 enp5s0: NIC Link is Up 10 Gbps, Flow Control: None
|
|
[2230418.550112] ixgbe 0000:05:00.0 enp5s0: Reset adapter
|
|
[2230421.118904] ixgbe 0000:05:00.0 enp5s0: NIC Link is Up 10 Gbps, Flow Control: None
|
|
=== lldpctl ===
|
|
-------------------------------------------------------------------------------
|
|
LLDP neighbors:
|
|
-------------------------------------------------------------------------------
|
|
Interface: enp5s0, via: LLDP, RID: 1, Time: 12 days, 03:11:42
|
|
Chassis:
|
|
ChassisID: mac aa:bb:cc:00:00:03
|
|
SysName: USW-Aggregation
|
|
Port:
|
|
PortID: ifname Port 4
|
|
=== end ===
|
|
"""
|
|
class H(BaseHTTPRequestHandler):
|
|
def _send(self, obj, code=200):
|
|
b = json.dumps(obj).encode(); self.send_response(code); self.send_header('Content-Type', 'application/json'); self.send_header('Content-Length', str(len(b))); self.end_headers(); self.wfile.write(b)
|
|
def do_POST(self):
|
|
self.rfile.read(int(self.headers.get('Content-Length', 0) or 0)); self._send({'execution_id': 'demo-exec-0001'})
|
|
def do_GET(self):
|
|
self._send({'status': 'completed', 'logs': [{'action': 'command_result', 'stdout': CANNED}]})
|
|
def log_message(self, *a): pass
|
|
HTTPServer(('127.0.0.1', 8650), H).serve_forever()
|