12 Commits

Include renames

Author	SHA1	Message	Date
jaredandClaude Opus 5.5	3834546f38	Mark host interfaces as unused ... Ports that are never meant to be up (compute-storage-01 nic1-3, large1's spare NIC and USB adapter) kept their hosts "degraded" and were the source of tonight's false alerts. An admin can now mark an interface unused from the device page, with an optional reason. Unused interfaces raise no link-down alerts, don't count toward the cluster-wide alert or the host's status, and show greyed as "unused" on the dashboard, device page and rack. Marking one closes any open link-down alert on it without a recovery note. New table unused_interfaces, created with the cutsheet tables. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 17:19:45 -05:00
jaredandClaude Opus 5.5	cbdae54d70	Rack: brush panel opening runs nearly the full width between the ears ... As in Ubiquiti's product image and the rack photo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:57:19 -05:00
jaredandClaude Opus 5.5	36cbdd061d	Rack: brush panel holds up at rack size ... The bristles were hundreds of hard strands, which aliased into flat stripes at normal rack size. Each row is now shaded root to tip with a faint strand texture over it, so the panel looks the same at any size. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:56:24 -05:00
jaredandClaude Opus 5.5	6e6150f9b9	Rack: rack handles on the Sliger ears ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:55:12 -05:00
jaredandClaude Opus 5.5	7408b1feca	Rack: Sliger fronts in red, white and blue, and the UniFi brush panel ... From the rack photo on the wiki, the three Sligers have their coloured perforated fronts fitted, not the faceplate-off view: Front drawings "Sliger CX4712 4U, red/white/blue front" draw the hex-perforated panel (about 20 rows of holes, the drive cages faint behind it), black rack ears, the power button with Gandalf's status ring, and the USB recess. UniFi UACC-Rack-Panel-Brush-1U is drawn from Ubiquiti's product images: silver face, ear plates with rounded slots, a recessed chamfered frame and two rows of bristles meeting at a seam. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:51:29 -05:00
jaredandClaude Opus 5.5	d8e827c88b	Rack: gear resting on other gear, and live desk switches on shelves ... A USW Flex Mini lies on top of the NVR. A shelf item with Front drawing "No shelf: gear resting on what is below" draws no tray or ears, so its contents sit directly on the item under it. UniFi desk switches on a shelf (Flex Mini, Flex) are drawn with their live faceplate, scaled to their real width from Ubiquiti's tech specs (107 mm and 122.5 mm), with working ports. faceplateSvg() returns a faceplate's SVG on its own so it can be placed inside the shelf drawing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 01:08:42 -05:00
jared	0243b23732	Merge remote-tracking branch 'origin/main' into zimaboard-and-facing ... # Conflicts: # static/style.css # tests/test_cutsheet.py	2026-11-11 00:46:13 -05:00
jaredandClaude Opus 5.5	486a93c5a0	Rack: ConnectX-3 SFP+ cards in the ZimaBoards' PCIe slots; correct NIC mapping ... From the rack photo, each ZimaBoard has a single-port ConnectX-3 lying flat in its side PCIe slot with a DAC attached. Front drawing "ZimaBoard 832 + ConnectX-3" draws the card beside the board at scale: PCB at board height, heatsink, SFP+ cage with the DAC and pull tab, and a Gandalf link mark for the card's interface. The jacks were lit in NIC name order, which put the ConnectX-3 (enp1s0, PCI bus 1) on the left RJ45. The onboard ports are enp2s0 (left) and enp3s0 (right); the PCIe card is enp1s0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:35:25 -05:00
jaredandClaude Opus 5.5	a9de175d90	Rack: ports-facing separate from posts, three views, ZimaBoard 832 shelves to scale ... Gear on the rear posts usually still faces the front (the StarTech's RPDU and ZimaBoard shelf), so "which posts" and "which way the ports face" are now separate fields (mount, facing). The page has three views: Front (front posts), Rear posts (rear-post gear seen from the front, i.e. what is behind the front gear) and Rear (from behind). An item seen from the side it doesn't face shows its back. Facing defaults to front, so existing items keep their meaning. Shelves are drawn at true scale with their contents ordered by a new "Position on shelf". The IceWhale ZimaBoard 832 is traced from IceWhale's labelled photo of its port end (ZimaDocs): Mini-DP, two RJ45-over-USB 3.0 stacks with link/activity LEDs, DC jack, gunmetal case, gold PCB edge and black base. Its RJ45 link lights follow the host's physical NICs and the status glow follows the host. New cutsheet_items columns facing and slot, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:12:07 -05:00
jaredandClaude Opus 5.5	ce12dede5f	Faceplates: USW Pro Max 24 PoE and 48 PoE ... Both laid out from the CC0 NetBox devicetype-library images, with jack centres measured from them: the 24 has one row of 24 RJ45 in groups of 8 (17-24 at 2.5G) and 2 SFP+; the 48 has two rows, odd ports on top, in groups of 16 (33-48 at 2.5G) and 4 SFP+ (49-52). The "2.5G" and "10G" bars under the faster ports are drawn too (fpSpeedBar). Registered as USPM24P/USPM48P with USPM24/USPM48 aliases, and as Front drawing options so the new switch draws on the rack before it is adopted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:01:12 -05:00
jaredandClaude Opus 5.5	565fdd81de	Rack: NVR Pro as a real faceplate; Sliger and Rosewill touch-ups ... The hand-drawn NVR Pro didn't match the UniFi faceplates: flat colours, low contrast and its own port shapes. It is now a FACEPLATES entry (UNVRPRO) built from the same parts as the UDM Pro: metal body, RJ45 jack, SFP+ cage, quad screen, vents and labels. Front drawing "UniFi NVR Pro" uses it, and it would go live if UniFi ever reports the model. Sliger bays are numbered 1-10 (driveAtlas's order); the Rosewill door is perforated with a latch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:31:19 -05:00
jaredandClaude Opus 5.5	0f4e129c20	Rack: drawn fronts for the NVR and server cases ... Items Gandalf has no live faceplate for can pick a Front drawing: the UniFi NVR Pro (drawn from the CC0 NetBox devicetype-library image), the Sliger CX4712 4U and Rosewill RSV-L4500U 4U cases (from driveAtlas's layouts), and generic 1U/2U/4U servers. The power light shows the linked device's live status. They export with the rest of the rack. New cutsheet_items column chassis, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:25:02 -05:00