10 Commits

Include renames

Author	SHA1	Message	Date
jaredandClaude Opus 5.5	a9de175d90	Rack: ports-facing separate from posts, three views, ZimaBoard 832 shelves to scale ... Gear on the rear posts usually still faces the front (the StarTech's RPDU and ZimaBoard shelf), so "which posts" and "which way the ports face" are now separate fields (mount, facing). The page has three views: Front (front posts), Rear posts (rear-post gear seen from the front, i.e. what is behind the front gear) and Rear (from behind). An item seen from the side it doesn't face shows its back. Facing defaults to front, so existing items keep their meaning. Shelves are drawn at true scale with their contents ordered by a new "Position on shelf". The IceWhale ZimaBoard 832 is traced from IceWhale's labelled photo of its port end (ZimaDocs): Mini-DP, two RJ45-over-USB 3.0 stacks with link/activity LEDs, DC jack, gunmetal case, gold PCB edge and black base. Its RJ45 link lights follow the host's physical NICs and the status glow follows the host. New cutsheet_items columns facing and slot, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:12:07 -05:00
jaredandClaude Opus 5.5	5fdd317539	Rack: clicking a port on an unlinked faceplate opens the cutsheet ... The NVR Pro is drawn by Front drawing because UniFi doesn't report it, so it has no device page; clicking one of its ports went to /device/UNVR-Pro and showed "No device with this name". Ports on a faceplate whose item isn't linked to a live device now open the port's cable when one is documented, and otherwise the item on the cutsheet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:53:18 -05:00
jaredandClaude Opus 5.5	50db56cdcb	Rack: draw the UniFi UACC blank 24-port keystone patch panel ... Front drawing "UniFi Patch Panel Blank 24" draws the real panel, laid out from the CC0 NetBox devicetype-library image: grey steel face, darker ears with oval holes, 24 keystone openings with the cable-support bar behind them, and a cable slot at each end. Ports with a documented cable get a keystone jack; cutsheet marks, port labels and run highlighting work as on the generic panel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:39:27 -05:00
jaredandClaude Opus 5.5	619a2c913d	Remove em and en dashes from the UI, code and docs ... Page titles read "Rack | GANDALF", ranges use a hyphen (U26-42, 1-100 of 300), empty cells show "-", and dash-separated phrases use a colon, comma or full stop. In the shared base.js only the on-screen strings changed (boot line, placeholders, offline banner and toast). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:37:56 -05:00
jaredandClaude Opus 5.5	565fdd81de	Rack: NVR Pro as a real faceplate; Sliger and Rosewill touch-ups ... The hand-drawn NVR Pro didn't match the UniFi faceplates: flat colours, low contrast and its own port shapes. It is now a FACEPLATES entry (UNVRPRO) built from the same parts as the UDM Pro: metal body, RJ45 jack, SFP+ cage, quad screen, vents and labels. Front drawing "UniFi NVR Pro" uses it, and it would go live if UniFi ever reports the model. Sliger bays are numbered 1-10 (driveAtlas's order); the Rosewill door is perforated with a latch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:31:19 -05:00
jaredandClaude Opus 5.5	0f4e129c20	Rack: drawn fronts for the NVR and server cases ... Items Gandalf has no live faceplate for can pick a Front drawing: the UniFi NVR Pro (drawn from the CC0 NetBox devicetype-library image), the Sliger CX4712 4U and Rosewill RSV-L4500U 4U cases (from driveAtlas's layouts), and generic 1U/2U/4U servers. The power light shows the linked device's live status. They export with the rest of the rack. New cutsheet_items column chassis, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:25:02 -05:00
jaredandClaude Opus 5.5	97e6692ebf	Rack: put a patch panel's name above its ports ... A long panel name (UACC-Rack-Panel-Patch-Blank-24) was drawn in the left ear at full size and ran under the ports. It is now a small caption in the panel's top-left corner, shortened past 48 characters with the full name in its tooltip. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:02:18 -05:00
jaredandClaude Opus 5.5	c50e1f8322	Rack: front and rear mounting, rack settings in the page ... Items are mounted from the front, the rear, or full depth. On a 4-post rack a front and a rear item can share a unit; a full-depth one takes both sides, and the rear view shows its back. Overlaps are checked per side. Shelf contents take the shelf's side. A Front / Rear switch flips the drawing. Racks are saved in Gandalf (new cutsheet_racks table) and edited on the rack page by admins: name, height, notes, add and delete. Renaming moves the rack's items; saving the first rack carries over the items of the config default it replaces. Config racks remain the fallback. Faceplates are stretched to the full width only when the drawing is close to the slot's proportions, so the PDU is not squashed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 22:35:37 -05:00
jaredandClaude Opus 5.5	bdd68a397d	Rack: link items to devices, shelves, several racks, export; fix layout and light mode ... Cutsheet items gain a "Gandalf device" link, so an item named after the product (UDM-Pro) shows the live device's faceplate, ports and status. Cable checks, suggestions, tickets and the device page treat an item and its linked device as one. Without this, product-named items drew as bare name plates. Items can sit on a shelf instead of a rack unit; the shelf draws what is on it with live status. Items have a rack, the page shows a tab per rack (config "racks"), and a rack can be downloaded as SVG or PNG. The rack is centred, long runs of empty units fold into one band (with a toggle), every device fills the 19" width, the UPS shows its front only, and the rack keeps its own palette so it reads in light mode. New cutsheet_items columns rack, shelf and device are added on first use. Deleting a shelf, or making it something else, is refused while it holds items; renaming it carries over. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 21:44:59 -05:00
jaredandClaude Opus 5.5	f655836446	Add a rack drawing (/rack) ... The rack front is drawn from the rack units on cutsheet items. Switches with a faceplate use it, with live port state; patch panels get a generic panel with port labels; everything else is a labelled plate. Each documented port shows its cutsheet state, and hovering a port lights up every port on the same cable run (through patch panels) and names the cables. Clicking opens the switch port or the cable. Overlapping items and items past the top of the rack are listed instead of drawn over another; where two claim the same top unit, the first one recorded wins. rack.units sets the height (default 42). /api/rack builds on the cutsheet view; cutsheet.rack_layout and cutsheet.port_marks hold the placement and per-port logic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:59:30 -05:00