8 Commits

Include renames

Author	SHA1	Message	Date
jaredandClaude Opus 5.5	0f4e129c20	Rack: drawn fronts for the NVR and server cases ... Items Gandalf has no live faceplate for can pick a Front drawing: the UniFi NVR Pro (drawn from the CC0 NetBox devicetype-library image), the Sliger CX4712 4U and Rosewill RSV-L4500U 4U cases (from driveAtlas's layouts), and generic 1U/2U/4U servers. The power light shows the linked device's live status. They export with the rest of the rack. New cutsheet_items column chassis, added on first use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:25:02 -05:00
jaredandClaude Opus 5.5	c50e1f8322	Rack: front and rear mounting, rack settings in the page ... Items are mounted from the front, the rear, or full depth. On a 4-post rack a front and a rear item can share a unit; a full-depth one takes both sides, and the rear view shows its back. Overlaps are checked per side. Shelf contents take the shelf's side. A Front / Rear switch flips the drawing. Racks are saved in Gandalf (new cutsheet_racks table) and edited on the rack page by admins: name, height, notes, add and delete. Renaming moves the rack's items; saving the first rack carries over the items of the config default it replaces. Config racks remain the fallback. Faceplates are stretched to the full width only when the drawing is close to the slot's proportions, so the PDU is not squashed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 22:35:37 -05:00
jaredandClaude Opus 5.5	bdd68a397d	Rack: link items to devices, shelves, several racks, export; fix layout and light mode ... Cutsheet items gain a "Gandalf device" link, so an item named after the product (UDM-Pro) shows the live device's faceplate, ports and status. Cable checks, suggestions, tickets and the device page treat an item and its linked device as one. Without this, product-named items drew as bare name plates. Items can sit on a shelf instead of a rack unit; the shelf draws what is on it with live status. Items have a rack, the page shows a tab per rack (config "racks"), and a rack can be downloaded as SVG or PNG. The rack is centred, long runs of empty units fold into one band (with a toggle), every device fills the 19" width, the UPS shows its front only, and the rack keeps its own palette so it reads in light mode. New cutsheet_items columns rack, shelf and device are added on first use. Deleting a shelf, or making it something else, is refused while it holds items; renaming it carries over. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 21:44:59 -05:00
jaredandClaude Opus 5.5	f655836446	Add a rack drawing (/rack) ... The rack front is drawn from the rack units on cutsheet items. Switches with a faceplate use it, with live port state; patch panels get a generic panel with port labels; everything else is a labelled plate. Each documented port shows its cutsheet state, and hovering a port lights up every port on the same cable run (through patch panels) and names the cables. Clicking opens the switch port or the cable. Overlapping items and items past the top of the rack are listed instead of drawn over another; where two claim the same top unit, the first one recorded wins. rack.units sets the height (default 42). /api/rack builds on the cutsheet view; cutsheet.rack_layout and cutsheet.port_marks hold the placement and per-port logic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:59:30 -05:00
jaredandClaude Opus 5.5	c262e5ecc8	Inventory links, cutsheet marks on faceplates, and single page titles ... Device pages get an Inventory button: it opens the device's HomeBox record once an admin pastes its URL (stored in the new device_links table; only URLs on inventory.base_url are accepted), and searches the inventory for the model until then. Tickets link the record too. Faceplate ports with a documented cable get a corner dot: green matches, red mismatch, grey documented but unconfirmed. The port's tooltip names the cable, and a legend toggle (remembered per browser) hides them. Page titles no longer repeat GANDALF ("Alert History - GANDALF - GANDALF"). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:47:14 -05:00
jaredandClaude Opus 5.5	86aa29b378	Cutsheet trace mode and mismatch alerts ... Trace a cord: pick a panel port, press Start, and unplug the cord at the panel. The page polls a new admin-only endpoint that reads every switch port's state from UniFi (cached 2 s), shows the one port that dropped with a button to record the cable, and confirms when it's plugged back in. Several ports dropping at once, or none within 3 minutes, is explained rather than guessed at. Mismatch alerts: the monitor runs the cutsheet check every poll. Each mismatched installed run (wrong neighbor, no link, missing port, port conflict) keeps one cable_mismatch event on its switch, resolved when fixed, and opens a P4 ticket after cutsheet.mismatch_ticket_hours (default 24, 0 never). Suppressing the switch or port stops the ticket. Also fixes buttons with the hidden attribute still showing, which left a Delete button on the new-cable form. Closes #12 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 16:54:57 -05:00
jaredandClaude Opus 5.5	52cfea5439	Cutsheet: show the next free cable ID as a hint, not a placeholder ... A placeholder of C01 in the empty ID field looked like a real value. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 16:10:51 -05:00
jaredandClaude Opus 5.5	b9412ff6ba	Add cutsheets: planned cabling checked against discovery ... A new Cutsheet page records where every cable is meant to go and compares it with what Gandalf discovers. - Inventory for what discovery can't see: patch panels, wall jacks, shelves and rack positions. Panels and jacks pass through front to rear. - Cables with two endpoints, ID, type, length, color, status (planned, installed, dark, retired) and notes; the far end may be unterminated. - Each cable's full run is traced through panels and jacks, and runs ending on a switch port are checked against its discovered neighbor (LLDP, client table, or a DAC serial seen at both ends): matches, wrong neighbor, no link, missing port, port conflict, unverified, idle. - Undocumented links: live switch ports no cable mentions, one click to add with what Gandalf already knows. Port panels show the planned cable. - Labels to make: cable IDs and panel-port labels not yet applied, with a print view, for a handheld label maker. - CSV export, and all-or-nothing import that upserts by cable ID. - Cables, panels and jacks appear in the dashboard search. Editing needs the admin group and a JSON request body. Every change is written to cutsheet_history in the same transaction. Tables are created on first use. Refs #12 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 16:05:08 -05:00