7 Commits

Include renames

Author	SHA1	Message	Date
jaredandClaude Opus 5.5	ce12dede5f	Faceplates: USW Pro Max 24 PoE and 48 PoE ... Both laid out from the CC0 NetBox devicetype-library images, with jack centres measured from them: the 24 has one row of 24 RJ45 in groups of 8 (17-24 at 2.5G) and 2 SFP+; the 48 has two rows, odd ports on top, in groups of 16 (33-48 at 2.5G) and 4 SFP+ (49-52). The "2.5G" and "10G" bars under the faster ports are drawn too (fpSpeedBar). Registered as USPM24P/USPM48P with USPM24/USPM48 aliases, and as Front drawing options so the new switch draws on the rack before it is adopted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-11 00:01:12 -05:00
jaredandClaude Opus 5.5	3c9e5fd593	Faceplates: model labels as printed on the units ... The label under each UniFi screen was one weight, left-aligned, and on the UDM read "Dream Machine Pro". Checked against the NetBox reference photos (and the UDM against the real unit), the labels are now centred under the screen with the first word bold and the rest light: "UDM Pro", "USW Pro" with its PoE mark, "USW", "NVR Pro", "USP PDU Pro". One helper (fpModel) draws them all, so the NVR no longer looks bolder than the switches. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:36:23 -05:00
jaredandClaude Opus 5.5	565fdd81de	Rack: NVR Pro as a real faceplate; Sliger and Rosewill touch-ups ... The hand-drawn NVR Pro didn't match the UniFi faceplates: flat colours, low contrast and its own port shapes. It is now a FACEPLATES entry (UNVRPRO) built from the same parts as the UDM Pro: metal body, RJ45 jack, SFP+ cage, quad screen, vents and labels. Front drawing "UniFi NVR Pro" uses it, and it would go live if UniFi ever reports the model. Sliger bays are numbered 1-10 (driveAtlas's order); the Rosewill door is perforated with a latch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 23:31:19 -05:00
jaredandClaude Opus 5.5	bdd68a397d	Rack: link items to devices, shelves, several racks, export; fix layout and light mode ... Cutsheet items gain a "Gandalf device" link, so an item named after the product (UDM-Pro) shows the live device's faceplate, ports and status. Cable checks, suggestions, tickets and the device page treat an item and its linked device as one. Without this, product-named items drew as bare name plates. Items can sit on a shelf instead of a rack unit; the shelf draws what is on it with live status. Items have a rack, the page shows a tab per rack (config "racks"), and a rack can be downloaded as SVG or PNG. The rack is centred, long runs of empty units fold into one band (with a toggle), every device fills the 19" width, the UPS shows its front only, and the rack keeps its own palette so it reads in light mode. New cutsheet_items columns rack, shelf and device are added on first use. Deleting a shelf, or making it something else, is refused while it holds items; renaming it carries over. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 21:44:59 -05:00
jaredandClaude Opus 5.5	c262e5ecc8	Inventory links, cutsheet marks on faceplates, and single page titles ... Device pages get an Inventory button: it opens the device's HomeBox record once an admin pastes its URL (stored in the new device_links table; only URLs on inventory.base_url are accepted), and searches the inventory for the model until then. Tickets link the record too. Faceplate ports with a documented cable get a corner dot: green matches, red mismatch, grey documented but unconfirmed. The port's tooltip names the cable, and a legend toggle (remembered per browser) hides them. Page titles no longer repeat GANDALF ("Alert History - GANDALF - GANDALF"). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 20:47:14 -05:00
jaredandClaude Opus 5.5	7e588e5b02	Keep every switch port and show SFP modules ... Ports were keyed by their UniFi name, so when two ports shared a name the later one replaced the earlier. The 24-port switch lost port 13 this way (ports 13 and 14 are both "Office TV"). A repeated name is now kept as "<name> (Port N)". Traffic rates are now matched to the previous poll by port number rather than name. Names are re-read from UniFi every poll, so a port renamed there keeps its rates instead of losing them for a cycle. Collect what UniFi reports about each SFP cage: whether a module is present, its type (DAC or optic), part, serial, fault flags, and DOM readings when the module has them. The faceplate draws empty cages, optics, DACs and unidentified modules differently and outlines a faulted module in red. The port panel gets an SFP Module section. Both ends of a DAC report the same cable serial, so each end links to the other. Closes #7 Closes #8 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-10 14:37:08 -05:00
jaredandClaude Opus 5.5	051e70b82b	Draw realistic front panels for every device model ... Replace the port blocks on device pages with SVG faceplates traced from reference images: Dream Machine Pro, USW Pro 24 PoE, USW Aggregation, USW Flex, USW Flex Mini, USP PDU Pro and UPS 2U Pro. Port LEDs use each model's documented colors, and ports show a cable or module when up. Remove SWITCH_LAYOUTS, which had wrong data: the aggregation switch was numbered across the rows instead of odd over even, and the USW Flex had an SFP cage it doesn't have. Models without a faceplate use plain blocks. Show PDU and UPS outlets with on/off state and auto power-cycle, and let the UPS page show its panel even though it reports no ports. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-11-05 11:11:48 -05:00