5 Commits
Author SHA1 Message Date
jaredandClaude Opus 5.5 4dfabce2fb Cutsheet: port names in UniFi that no longer fit, document a cable from topology
Lint / JS (eslint) (push) Successful in 23s
Lint / Python (flake8) (push) Successful in 1m10s
Lint / Notify on failure (push) Skipped
Lint / Deploy (push) Skipped
Lint / Python (flake8) (pull_request) Successful in 53s
Lint / JS (eslint) (pull_request) Successful in 11s
Lint / Notify on failure (pull_request) Skipped
Lint / Deploy (pull_request) Skipped
Security / Python Security (bandit) (push) Successful in 1m26s
Test / Python Tests (pytest) (push) Successful in 1m49s
Security / Python Security (bandit) (pull_request) Successful in 2m17s
Test / Python Tests (pytest) (pull_request) Successful in 2m12s
- topology.port_name_report: switch port names that no longer fit what is
  plugged in, as a checklist with suggested names: named after the wrong
  device, named after a device that moved to another port, named with nothing
  plugged in (and who was last seen there), and still "Port N" with a known
  device on it. Ports named after a device that is only off are left alone.
  Gandalf only reports; it never renames anything in UniFi.
- /api/cutsheet returns it as port_names; the cutsheet page shows it as
  "Port names in UniFi", grouped, with a summary chip.
- The topology cable panel's "not documented" gets a "document it" link that
  opens the cutsheet's new-cable form with both ends, the NIC and DAC filled
  in; /cutsheet?... now takes b_device, b_port and cable_type.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 13:48:52 -05:00
jaredandClaude Opus 5.5 60d892badb Power: flag frozen outlet watts, draw the SmartPower Strip
Lint / JS (eslint) (push) Successful in 14s
Lint / Python (flake8) (push) Successful in 1m3s
Lint / Notify on failure (push) Skipped
Lint / Deploy (push) Skipped
Security / Python Security (bandit) (push) Successful in 1m9s
Test / Python Tests (pytest) (push) Successful in 1m29s
Lint / Python (flake8) (pull_request) Successful in 1m9s
Lint / JS (eslint) (pull_request) Successful in 14s
Lint / Notify on failure (pull_request) Skipped
Lint / Deploy (pull_request) Skipped
Security / Python Security (bandit) (pull_request) Successful in 1m26s
Test / Python Tests (pytest) (pull_request) Successful in 1m48s
UniFi can keep serving one frozen set of USP PDU Pro outlet readings for hours
while the unit's total stays live (seen on prod: every outlet at 120.661 V with
the same watts all session, summing to 321 W of a live 593 W total). The monitor
now notices when a power unit's loaded outlet readings have not changed for 15
minutes and marks them stale. The topology page shows "stale" instead of watts,
the power badge says "fed", and a "to look at" chip says since when; the device
page marks the readings too.

Adds a UP6 (USP-Strip) faceplate traced from Ubiquiti's datasheet render: three
facing pairs of US outlets, four USB-C ports (outlet 7), the LED and the cord.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 22:46:04 -05:00
jaredandClaude Opus 5.5 b9e008bc2b Topology: tap to trace on phones, name cables into a patch panel
Lint / JS (eslint) (push) Successful in 19s
Lint / Python (flake8) (push) Successful in 1m20s
Lint / Notify on failure (push) Skipped
Lint / Deploy (push) Skipped
Lint / JS (eslint) (pull_request) Successful in 27s
Lint / Python (flake8) (pull_request) Successful in 1m46s
Lint / Notify on failure (pull_request) Skipped
Lint / Deploy (pull_request) Skipped
Security / Python Security (bandit) (pull_request) Successful in 1m9s
Test / Python Tests (pytest) (pull_request) Successful in 1m23s
Security / Python Security (bandit) (push) Successful in 1m10s
Test / Python Tests (pytest) (push) Successful in 1m18s
- Touch screens have no hover, so the first tap on a device traces its path to
  the internet and its power feeds; a second tap opens it. Tapping empty canvas
  clears it, and the trace survives the 30 s refresh.
- A cutsheet cable now carries where its other end goes. An unknown device on a
  cable documented into a patch panel is drawn as that panel's jacks, named
  "Patch panel port N"; a named stub notes "via Patch panel port N". The cable
  panel shows the far end of the cutsheet cable.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 22:16:16 -05:00
jaredandClaude Opus 5.5 415d2222e7 Topology: power map, what each outlet feeds
Lint / JS (eslint) (push) Successful in 21s
Lint / Python (flake8) (push) Successful in 2m36s
Lint / Notify on failure (push) Skipped
Lint / Deploy (push) Skipped
Test / Python Tests (pytest) (push) Successful in 2m46s
Lint / JS (eslint) (pull_request) Successful in 15s
Lint / Python (flake8) (pull_request) Successful in 2m14s
Lint / Notify on failure (pull_request) Skipped
Lint / Deploy (pull_request) Skipped
Security / Python Security (bandit) (push) Successful in 1m33s
Security / Python Security (bandit) (pull_request) Successful in 54s
Test / Python Tests (pytest) (pull_request) Successful in 1m3s
- Each PDU, UPS and power strip card lists its outlets that feed
  something, draw power or are off, with live watts. Each device fed
  gets a power badge with what it draws. Hovering a power card or a
  device draws its feeds as dotted lines and keeps both ends lit.
- What an outlet feeds: a saved assignment, else the outlet's UniFi name
  when it names a device (or the modem), else a MAC in its name that
  belongs to a host NIC (the monitor's host_macs) or UniFi device.
- Admins click an outlet to set what it feeds, nothing, or automatic.
  Saved in a new power_feeds table (created with the cutsheet tables);
  PUT /api/topology/power/<device>/<outlet>, admin and JSON only, with
  the device, outlet and target checked. UniFi is never changed.
- An outlet that is off but feeds something is listed under "to look at".
- Power gear is shown by default again, now that it has something to say.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 20:28:13 -05:00
jaredandClaude Opus 5.5 aa7341af06 Topology: a live page drawn from the real gear
Lint / JS (eslint) (push) Successful in 21s
Lint / Python (flake8) (push) Successful in 1m20s
Lint / Notify on failure (push) Skipped
Lint / Deploy (push) Skipped
Security / Python Security (bandit) (push) Successful in 1m0s
Test / Python Tests (pytest) (push) Successful in 1m48s
Lint / Python (flake8) (pull_request) Successful in 1m44s
Lint / JS (eslint) (pull_request) Successful in 30s
Lint / Notify on failure (pull_request) Skipped
Lint / Deploy (pull_request) Skipped
Security / Python Security (bandit) (pull_request) Successful in 1m42s
Test / Python Tests (pytest) (pull_request) Successful in 1m16s
The dashboard's hand-drawn diagram was out of date. /topology replaces it
with the network as the switches report it, every device drawn to scale
from its faceplate or cutsheet front, and one cable per physical link
leaving the port it is plugged into.

- topology.py builds the graph: switch-to-switch cables seen from both ends
  are merged, servers get one cable per NIC, the gateway's internet port
  goes to the modem and on to the internet, unknown neighbours are stubs,
  and gear with no live cable is drawn where it was last seen.
- Ports named after a different device than the one plugged in are flagged.
- Cables show medium, speed, state and traffic; click one for its details,
  hover a device to trace its path to the internet; pan, zoom and filters.
- The monitor now keeps host_macs (MAC to host NIC) in link_stats.
- The old dashboard diagram and its JS and CSS are removed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 19:30:59 -05:00