#!/bin/bash

#==============================================================================
# Drive Atlas - Server Drive Mapping Tool
# Maps physical drive bays to logical device names using PCI paths
#==============================================================================

#------------------------------------------------------------------------------
# Chassis Type Definitions
# These define the physical layout and display formatting for each chassis type
#------------------------------------------------------------------------------

generate_10bay_layout() {
    local hostname=$1
    build_drive_map

    # Fixed width for consistent box drawing (fits device names like "nvme0n1")
    local drive_width=10

    # Main chassis section
    printf "┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐\n"
    printf "│  %-126s  │\n" "$hostname - 10-Bay Hot-swap Chassis"
    printf "│                                                                                                                                │\n"

    # M.2 NVMe slot if present
    if [[ -n "${DRIVE_MAP[m2-1]}" ]]; then
        printf "│    M.2 NVMe: %-10s                                                                                                          │\n" "${DRIVE_MAP[m2-1]}"
        printf "│                                                                                                                                │\n"
    fi

    printf "│    Front Hot-swap Bays:                                                                                                        │\n"
    printf "│                                                                                                                                │\n"

    # Bay top borders
    printf "│    "
    for bay in {1..10}; do
        printf "┌──────────┐ "
    done
    printf "   │\n"

    # Bay contents
    printf "│    "
    for bay in {1..10}; do
        printf "│%-2d:%-7s│ " "$bay" "${DRIVE_MAP[$bay]:-EMPTY}"
    done
    printf "   │\n"

    # Bay bottom borders
    printf "│    "
    for bay in {1..10}; do
        printf "└──────────┘ "
    done
    printf "   │\n"

    printf "└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘\n"
}

generate_large1_layout() {
    build_drive_map

    cat << 'EOF'
┌─────────────────────────────────────────────────────────────┐
│                           large1                            │
│                      Unique 3x5 Grid Chassis                │
│                                                             │
│ ┌──────────────────────────────────────────────┐            │
│ │               Motherboard                    │            │
│ │                                              │            │
│ │                                  ┌──┐┌──┐    │            │
│ │                                  │M1││M2│    │            │
│ │                                  └──┘└──┘    │            │
│ └──────────────────────────────────────────────┘            │
│                                                             │
│ ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐ │
│ │                 │ │                 │ │                 │ │
│ │       1         │ │        2        │ │        3        │ │
│ │                 │ │                 │ │                 │ │
│ └─────────────────┘ └─────────────────┘ └─────────────────┘ │
│ ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐ │
│ │                 │ │                 │ │                 │ │
│ │       4         │ │        5        │ │        6        │ │
│ │                 │ │                 │ │                 │ │
│ └─────────────────┘ └─────────────────┘ └─────────────────┘ │
│ ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐ │
│ │                 │ │                 │ │                 │ │
│ │       7         │ │        8        │ │        9        │ │
│ │                 │ │                 │ │                 │ │
│ └─────────────────┘ └─────────────────┘ └─────────────────┘ │
└─────────────────────────────────────────────────────────────┘
EOF
}

#------------------------------------------------------------------------------
# Server-Specific Drive Mappings
# Maps PCI paths to physical bay numbers for each server
# Format: "pci-path bay-number"
#------------------------------------------------------------------------------

declare -A SERVER_MAPPINGS=(
    # compute-storage-01 (formerly medium2)
    # Motherboard: B650D4U3-2Q/BCM with AMD SATA controller
    # HBA: LSI SAS3008 at 01:00.0 (mini-SAS HD ports)
    # Cable mapping from user notes:
    #   - Mobo SATA: top-right=bay1, bottom-right=bay2, bottom-left=bay3, top-left=bay4
    #   - HBA bottom mini-SAS: bays 5,6,7,8
    #   - HBA top mini-SAS: bays 9,10
    ["compute-storage-01"]="
        pci-0000:0d:00.0-ata-2 1
        pci-0000:0d:00.0-ata-1 2
        pci-0000:0d:00.0-ata-3 3
        pci-0000:0d:00.0-ata-4 4
        pci-0000:01:00.0-sas-phy6-lun-0 5
        pci-0000:01:00.0-sas-phy7-lun-0 6
        pci-0000:01:00.0-sas-phy5-lun-0 7
        pci-0000:01:00.0-sas-phy2-lun-0 8
        pci-0000:01:00.0-sas-phy4-lun-0 9
        pci-0000:01:00.0-sas-phy3-lun-0 10
        pci-0000:0e:00.0-nvme-1 m2-1
    "

    # storage-01
    # Different motherboard, no HBA currently
    # TODO: Map actual PCI paths after running diagnose-drives.sh
    ["storage-01"]="
    "

    # large1
    # Unique chassis - 1/1 configuration
    # TODO: Map actual PCI paths after running diagnose-drives.sh
    ["large1"]="
    "
)

declare -A CHASSIS_TYPES=(
    ["compute-storage-01"]="10bay"
    ["compute-storage-gpu-01"]="10bay"
    ["storage-01"]="10bay"
    ["large1"]="large1"
    ["micro1"]="micro"
    ["monitor-02"]="micro"
)

#------------------------------------------------------------------------------
# Core Functions
#------------------------------------------------------------------------------

build_drive_map() {
    local host=$(hostname)
    declare -A drive_map

    local mapping=${SERVER_MAPPINGS[$host]}

    if [[ -n "$mapping" ]]; then
        while read -r path slot; do
            [[ -z "$path" || -z "$slot" ]] && continue

            if [[ -L "/dev/disk/by-path/$path" ]]; then
                local drive=$(readlink -f "/dev/disk/by-path/$path" | sed 's/.*\///')
                drive_map[$slot]=$drive
            fi
        done <<< "$mapping"
    fi

    # Make drive_map available globally
    declare -g -A DRIVE_MAP=()
    for key in "${!drive_map[@]}"; do
        DRIVE_MAP[$key]=${drive_map[$key]}
    done
}

get_drive_smart_info() {
    local device=$1
    local smart_info=$(sudo smartctl -A -i -H /dev/$device 2>/dev/null)
    local temp=$(echo "$smart_info" | grep "Temperature" | awk '{print $10}' | head -1)
    local type=$(echo "$smart_info" | grep "Rotation Rate" | grep -q "Solid State" && echo "SSD" || echo "HDD")
    local health=$(echo "$smart_info" | grep "SMART overall-health" | grep -q "PASSED" && echo "✓" || echo "✗")
    local model=$(echo "$smart_info" | grep "Device Model\|Model Number" | cut -d: -f2 | xargs)
    local serial=$(echo "$smart_info" | grep "Serial Number" | awk '{print $3}')

    echo "$type|$temp°C|$health|$model|$serial"
}

#------------------------------------------------------------------------------
# Main Display Logic
#------------------------------------------------------------------------------

HOSTNAME=$(hostname)
CHASSIS_TYPE=${CHASSIS_TYPES[$HOSTNAME]:-"unknown"}

# Display chassis layout
case "$CHASSIS_TYPE" in
    "10bay")
        generate_10bay_layout "$HOSTNAME"
        ;;
    "large1")
        generate_large1_layout
        ;;
    "micro")
        echo "Micro server layout not yet implemented"
        ;;
    *)
        echo "┌─────────────────────────────────────────────────────────┐"
        echo "│  Unknown server: $HOSTNAME"
        echo "│  No chassis mapping defined yet"
        echo "│  Run diagnose-drives.sh to gather PCI path information"
        echo "└─────────────────────────────────────────────────────────┘"
        ;;
esac

#------------------------------------------------------------------------------
# Drive Details Section
#------------------------------------------------------------------------------

echo -e "\n=== Drive Details with SMART Status ==="
printf "%-15s %-10s %-8s %-8s %-8s %-30s %-20s\n" "DEVICE" "SIZE" "TYPE" "TEMP" "HEALTH" "MODEL" "SERIAL"
echo "----------------------------------------------------------------------------------------------------------------------------"

# SATA/SAS drives
lsblk -d -o NAME | grep -v "nvme" | grep -v "rbd" | grep -v "loop" | grep -v "NAME" | while read device; do
    if [ -b "/dev/$device" ]; then
        size=$(lsblk -d -n -o SIZE "/dev/$device" 2>/dev/null)
        smart_info=$(get_drive_smart_info "$device")
        IFS='|' read -r type temp health model serial <<< "$smart_info"
        printf "%-15s %-10s %-8s %-8s %-8s %-30s %-20s\n" "/dev/$device" "$size" "$type" "$temp" "$health" "$model" "$serial"
    fi
done

# NVMe drives
if command -v nvme >/dev/null 2>&1; then
    nvme_drives=$(sudo nvme list 2>/dev/null | grep "^/dev")
    if [ -n "$nvme_drives" ]; then
        echo -e "\n=== NVMe Drives ==="
        printf "%-15s %-10s %-10s %-40s %-20s\n" "DEVICE" "SIZE" "TYPE" "MODEL" "SERIAL"
        echo "----------------------------------------------------------------------------------------------------------------------------"
        echo "$nvme_drives" | awk '{printf "%-15s %-10s %-10s %-40s %-20s\n", $1, $6, "NVMe", $3, $2}'
    fi
fi

#------------------------------------------------------------------------------
# Optional sections
#------------------------------------------------------------------------------

# Ceph RBD Devices
rbd_output=$(lsblk -o NAME,SIZE,TYPE,MOUNTPOINT 2>/dev/null | grep "rbd" | sort -V)
if [ -n "$rbd_output" ]; then
    echo -e "\n=== Ceph RBD Devices ==="
    printf "%-15s %-10s %-10s %-20s\n" "DEVICE" "SIZE" "TYPE" "MOUNTPOINT"
    echo "------------------------------------------------------------"
    echo "$rbd_output"
fi

# Show mapping diagnostic info if DEBUG is set
if [[ -n "$DEBUG" ]]; then
    echo -e "\n=== DEBUG: Drive Mappings ==="
    for key in "${!DRIVE_MAP[@]}"; do
        echo "Bay $key: ${DRIVE_MAP[$key]}"
    done | sort -n
fi